Charbroil 463460712 (Classic)

Stainless steel burner for Charbroil model 463460712.

Replaces Charbroil factory part# G431-0300-W1

Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9

Burner crossover tube for Charbroil model 463460712.

Replaces Charbroil factory part# G413-0004-W1

Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of three (3).

Replaces Charbroil factory part# G432-0002-W1

Part Number: 68763
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 27 15/16”
Material: matte cast iron
Weight: 13.0

Stainless steel aftermarket Flame Tamer heat plate.

• Stainless equivalent of part 98741
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 98741-SS
Dimension Front-to-Back: 14 11/16”
Dimension Side-to-Side: 4 5/16”
Material: stainless steel
Weight: 0.8

Porcelain steel Flame Tamer. Sold individually.

Replaces Charbroil factory part# G433-0016-W1

Part Number: 98741
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 4 5/16”
Material: porcelain steel
Weight: 0.9

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Burner mounted replacement electrode for use with burner 15641.

• Ceramic insulator
• Wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03351
Material: ceramic
Weight: 0.2

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G409-0021-W1

Part Number: 03342
Weight: 0.3

Electrode with 24.5” wire that has a female spade/flat end for Charbroil model 463460712. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# G501-0010-W1

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

Universal black control knob. Counter-clockwise bezel.

• Off position D-Value: Selectable
• Knob diameter: 2 1/16”
• Socket diameter: 8mm
• Knob shaft: None

Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05

Black control knob for Fire Magic Custom, Regal, and Gourmet grills.

• Off position D-Value: 6 o'clock
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: None

Replaces Charbroil factory part# G430-0026-W2

Part Number: 01700
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1

Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.

• Requires minimum 3/8” mounting hole
• Single 1 3/8” probe
• Threaded portion of probe stops at 1/2” from base
• See photo for details

Replaces Charbroil factory part# G515-0031-W1

Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.

Part Number: 40240
Material: chrome steel
Weight: 0.9

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1