Home > Charbroil Grill Models > Charbroil 463731208Char-Broil LP gas outdoor BBQ grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Part diagrams and owners manuals for Charbroil model: 463731208
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit Charbroil model: 463731208
463731208 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
463731208 Cooking Grates
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Charbroil factory part# 80010139
Part Number: 51051
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 25 1/4”
Material: porcelain steel wire
Weight: 3.4
$61.45
463731208 Heat Plates
Porcelain enameled steel
heat plate for Charbroil model 463731208.
Replaces Charbroil factory part# 80010138
Part Number: 98401
Dimension Front-to-Back: 6 1/8”
Dimension Side-to-Side: 23 13/16”
Material: porcelain steel
Weight: 1.13
$32.16
463731208 Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
$5.35
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04420
Material: ceramic
Weight: 0.1
$9.89
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-28B
Weight: 0.2
$9.60
Push-Button self-grounding
piezo spark generator. Has round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. For more information, see our help center article
Ignition 101.
Replaces Charbroil factory part# 80010009
Part Number: 03100
Weight: 0.1
$9.25
463731208 Knobs and Handles
Black control knob.
- Off position D-Value: 9 o'clock
- Knob diameter: 1 3/4”
- Socket diameter: 8mm
- Knob shaft: None
Replaces Charbroil factory part# 80007931
Part Number: 04470
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1
$5.77
463731208 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59