Parts for Charbroil 463750506

Home > Charbroil Grill Models > Charbroil 463750506

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.

Replacement grill parts for Charbroil model: 463750506

463750506 Venturis

Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.

Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1

$12.82

All Charbroil Venturis

463750506 Cooking Grids

Commercial grade 304 stainless steel cooking grid with 1/4” diameter rods. Made in USA

Replaces Charbroil factory part# 4152739

Part Number: CG-45SS
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: Stainless steel
Weight: 6.0

$76.13

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

Made in USA
304 commercial grade stainless steel
Solid .225 diameter stainless rods
Sold individually

Part Number: 55701-SS
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: stainless steel
Weight: 5.0

$76.13

ONE PANEL. Genuine OEM cast iron cooking grid, single panel.

Sold individually
Number required varies
Porcelain treated, flat matte finish.

Part Number: 10225-T406
Dimension Front-to-Back: 14 1/8”
Dimension Side-to-Side: 12 1/4”
Material: Cast iron
Weight: 4.75

$43.93

All Charbroil Cooking Grids

463750506 Vaporiser Bar

Stainless steel VapoRiser Bar (V-Bar). Sold individually, number required varies. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Charbroil factory part# 4500290

Part Number: CLA-TS0024
Dimension Front-to-Back: 5 1/2”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 2.3

$47.99

All Charbroil Vaporiser Bar

463750506 Igniter Components

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

$5.35

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

$5.35

Collector box and ceramic electrode with male spade connector for models with 12112 or 11512 burners. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04420
Material: ceramic
Weight: 0.1

$9.89

Collector Box and electrode for Charbroil top ported TBBC & TLBBC burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-28B
Weight: 0.2

$9.60

All Charbroil Igniter Components

463750506 Knobs and Handles

Black control knob.

Off position D-Value: 9 o'clock
Knob diameter: 1 3/4”
Socket diameter: 8mm
Knob shaft: None

Replaces Charbroil factory part# 4154470

Part Number: 04470
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1

$5.77

All Charbroil Knobs and Handles

463750506 Warming Racks

Chrome steel bottom warming rack for Charbroil 7000 series U-burner grills for Charbroil model 463750506.

Replaces Charbroil factory part# 4152124

Part Number: 02124
Dimensions: 23 1/2” x 10 1/2”
Material: chrome steel wire
Weight: 1.10

$29.08

All Charbroil Warming Racks

463750506 Accessories

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

$6.64

Deluxe 17” stainless steel turner.

Soft comfort rubber grip
Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

Ideal for cooking pieces of meat or vegetables
Self basting, easy to use
Locks on spit rod with thumb screw (supplied)
6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

$19.30

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Thursday, April 4, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.