Charbroil 466242404

Cast iron burner for Charbroil model 466242404.

Replaces Charbroil factory part# 80001449

Part Number: CIDCH
Dimensions: 13 13/16” x 2 1/4”
Material: cast iron
Weight: 3.0

Main burner support bar bracket and gas carryover tubes. Made in USA . A universal bracket designed by Charbroil to replace a number of burner suppport brackets that are no longer available. Adjustable mounting hardware allows part to fit different width Charbroil-made grills.

• Instructions and bracket assembly hardware included
• Mounting screws for attaching to grill not supplied.
• Adjustable form 25” to 27 1/2”.

Replaces part numbers 80012481, 80002930, 80002950, 80000683 and G40803000000

Part Number: CLA-MX0034
Dimensions: 27 1/2
Material: carbon steel
Weight: 1.1

Heavy duty stainless steel cooking grid.

• 304 commercial grade stainless
• Solid 5/16” stainless rods
• Sold individually
• Made in USA .

Part Number: CLA52932S
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 12 1/4”
Material: solid 304 stainless steel rod
Weight: 6.4

Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Replaces Charbroil factory part# 80001453

Part Number: 52932
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 24 1/2”
Material: porcelain steel wire
Weight: 12.11

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0143-X3
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 2.4

Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Replaces Charbroil factory part# 80000273

Part Number: CLA-TS0143
Dimension Front-to-Back: 15”
Dimension Side-to-Side: 4 3/16”
Material: stainless steel
Weight: 0.8

Stainless steel heat plate/Flame Tamer for Charbroil model 466242404.

Replaces Charbroil factory part# 80000273

Part Number: CBHP4
Dimension Front-to-Back: 15 1/16”
Dimension Side-to-Side: 4 5/16”
Material: stainless steel
Weight: 0.7

Electrode assembly. Includes electrode with wire, collector box, and mounting bolt with nut. Wire connects to spark generator with flat female spade connector, which is typically used with electronic (battery operated) ignitors (see Ignition 101 in our help center).

Replaces Charbroil factory part# 80001219

Part Number: 00653
Material: ceramic
Weight: 0.1

Universal black control knob. Counter-clockwise bezel.

• Off position D-Value: Selectable
• Knob diameter: 2 1/16”
• Socket diameter: 8mm
• Knob shaft: None

Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05

Black control knob for Fire Magic Custom, Regal, and Gourmet grills.

• Off position D-Value: 6 o'clock
• Knob diameter: 2”
• Socket diameter: 8mm
• Knob shaft: None

Replaces Charbroil factory part# 80000825

Part Number: 01700
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1

Round temperature gauge. Fits MHP Grills JNR, WNK, TJK, GJK, WRG, TRG.

• 2 1/2” diameter.
• Single prob
• Requires 3/8” mounting hole

Replaces Charbroil factory part# 80000096



Part Number: GG-TG4
Weight: 0.15

Rectangular heat indicator for old style MHP grills that has two pegs and a center probe to mount through the casting. It was used on older JNR and WNK grills. We are not sure when MHP changed to the newer heat indicator GG-TG4 that has one larger peg to mount. The GG-TG3 needs two small holes for mounting and one hole in the center for the probe.

Part Number: GG-TG3
Dimensions: 2 5/8” x 2 1/4”
Weight: 0.15

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7