Charbroil 4665804 (Masterflame 5000)

Stainless steel burner and venturi assembly for Charbroil model 4665804.

Replaces Charbroil factory part# 4504645

Part Number: 11612-76302
Dimensions: 16 7/8” x 2 1/4”
Material: stainless steel
Weight: 3.0

Stainless steel burner for Charbroil model 4665804.

Part Number: 11612
Dimensions: 16 7/8” x 2 1/4”
Material: stainless steel
Weight: 1.4

L-shaped venturi pair. Includes all necessary gaskets and screws/nuts.

Part Number: 76302
Dimensions: 4 5/8” x 1 1/2”
Material: zinc plated steel
Weight: 0.6

Chrome steel cooking grid. Sold individually.

Replaces Charbroil factory part# 4152740

Part Number: 40101
Dimension Front-to-Back: 11 1/4”
Dimension Side-to-Side: 19 1/2”
Material: chrome steel wire
Weight: 2.4

carbon steel rock grate for Charbroil model 4665804.

Replaces Charbroil factory part# 4156408

Part Number: 96501
Dimensions: 8 5/16” x 18”
Material: steel wire
Weight: 2.5

Stainless steel Vap-O-Riser protective burner shields for 5000 series grills for Charbroil model 4665804.

Replaces Charbroil factory part# 4156416

Part Number: VRB-5
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: ”
Material: stainless steel
Weight: 0.45

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.

Includes:
• Gas collector box
• Ceramic electrode and wire
• Mounting hardware

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-11B
Weight: 0.3

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

Push-Button self-grounding piezo spark generator. Has round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Replaces Charbroil factory part# 4153713

Part Number: 03100
Weight: 0.1

Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:

• Gas collector box
• Ceramic electrode and connecting wire with male round connector
• Mounting nuts and bolts

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Charbroil factory part# 4501758

Part Number: 04400R
Weight: 0.3

Black control knob.

• Off position D-Value: 9 o'clock
• Knob diameter: 1 3/4”
• Socket diameter: 8mm
• Knob shaft: None

Replaces Charbroil factory part# 4154203

Part Number: 04470
Dimensions: 1 7/8” x 1 7/8”
Material: plastic
Weight: 0.1

Durable 2 5/16” round briquettes

• Self-cleaning
• Control flare-ups while holding an even heat pattern.
• About 53 pieces, covers approximately 275 sq. inches.
• Fits all gas grills

Part Number: BQ-5
Weight: 7.2

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Ceramic briquettes 48 pieces. Fits briquette trays 94751, 92571 and and simular trays. Works in all grills designed for briquettes or lava rock. Each briquette measures 2” x 2” x 3/4".

Part Number: 41648
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.5

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3