Home > Charbroil Grill Models > Charbroil GG681VS
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Charbroil grill.
Replacement grill parts for the Charbroil GG681VS
GG681VS Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 11102-70201
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 4.5
$66.65
Stainless steel burner for Charbroil model GG681VS.
Part Number: 11102
Dimensions: 15 7/8” x 8”
Material: stainless steel
Weight: 2.8
$43.13
Stainless steel burner and venturi assembly kit. Contains one standard EDSB SS H burner and two (2) V-12 stainless steel single adjustable venturi..
Part Number: EDSB+V-11
Dimensions: 7 1/4” x 15 1/2”
Material: stainless steel
Weight: 2.0
$56.54
GG681VS Venturis
straight adjustable single venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 70201
Dimensions: 5 1/8
Material: zinc plated steel
Weight: 0.4
$16.93
Single Gasket Kit Economy Burners for Charbroil model GG681VS.
Part Number: SHK4
Weight: 0.01
$4.02
GG681VS Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 54501
Dimension Front-to-Back: 13”
Dimension Side-to-Side: 19”
Material: porcelain steel wire
Weight: 4.6
$49.81
GG681VS Rock Grates
Carbon steel
rock grate for Charbroil model GG681VS.
Part Number: 90501
Dimensions: 11 1/8” x 17 1/4”
Material: steel wire
Weight: 2.13
$25.30
GG681VS Igniter Components
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
$10.81
GG681VS Warming Racks
Universal warming rack. For use on grills with at least 22” inside dimension.
Part Number: AP-6A
Dimensions: 6” x 21 1/2”
Material: Chrome steel
Weight: 1.3
$17.36
GG681VS Valves, Orifices, and Manifolds
In post control valve without manifold or orifice, with 1/8” NPT
pipe thread for
hood orifice. Fits Charbroil, Falcon, and most twin in post control grills with
hood orifice. Orifice not included. Use original or our part #37900.
Part Number: 38800
Dimensions: 3 1/8” x 1 1/4”
Material: brass
Weight: 0.3
$25.15
Brass
hood orifice with #72
starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1
$9.17
GG681VS Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$22.17
HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.
Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0
$20.09
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31