Heat Plates for Coleman grills

Porcelain steel Heat Tent for some Coleman grills.

Part Number: 91731
Dimension Front-to-Back: 25 5/16”
Dimension Side-to-Side: 8 1/4”
Material: porcelain steel
Weight: 3.0

Universal adjustable stainless steel heat plate/Flame Tamer for some Coleman grills. Designed primarily to replace lava rock/briquettes grates, the plate simply sets on four ”legs” in the bottom of the grill and covers the burner, much as the lava rocks would. Can also be used to replace existing heat plates/Flame Tamers if one of the four available lengths is suitable.

• Adjustable to four lengths: 19 3/4”, 22 3/4”, 25 3/4”, 28 3/4”.
• Replaces briquettes, lava rock, or existing heat distribution plates in many gas grills.
• Heavy duty stainless steel.
• Hardware included

Part Number: 92375
Dimension Front-to-Back: 29”
Dimension Side-to-Side: 8 1/2”
Material: stainless steel
Weight: 2.2

Universal adjustable stainless steel heat plate/ Flame Tamer for some Coleman grills. Designed to fit most grills with front-to-back tube burners. Length adjusts from 12” to 18” in 1/2” increments; width is 4”. Replaces many original equipment front-to-back heat plates.

Part Number: 92381
Dimension Front-to-Back: ”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 0.85

Porcelain steel Flavor Grid for some Coleman grills. Sold individually, number required varies by grill.

Part Number: 93031
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: porcelain steel
Weight: 1.1

Porcelain steel Heat Distribution Plate for some Coleman grills. Sold individually.

Part Number: 93331
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 5 13/16”
Material: porcelain steel
Weight: 1.4

Stainless steel Vaporiser Bar (heat plate) for some Coleman grills. Fits Charbroil MasterFlame series 7000 grills, others.

Part Number: 94171
Dimension Front-to-Back: 23 7/16”
Dimension Side-to-Side: 2 1/2”
Material: stainless steel
Weight: 0.6

Stainless steel Vaporiser Bar (heat plate) for some Coleman grills. Fits Charbroil MasterFlame series 8000 grills, others.

Part Number: 94181
Dimension Front-to-Back: 26 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.3

Porcelain steel Flame Tamer / Heat Tent for some Coleman grills. Sold individually.

Part Number: 95131
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.4

Stainless steel aftermarket Flame Tamer / Heat Tent for some Coleman grills.

• Stainless equivalent of part 95131
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Part Number: 95131-SS
Dimension Front-to-Back: 16 1/2”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.5

Flame Diffuser for some Coleman grills. Porcelain enameled, glossy finish.

Part Number: 96051
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 5 1/16”
Material: porcelain steel
Weight: 2.0

Porcelain steel Heat Tent for some Coleman grills. Sold individually.

Part Number: 97321
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 3 3/4”
Material: porcelain steel
Weight: 0.7

Porcelain steel Flame Tamer for some Coleman grills. Sold individually.

Part Number: 97371
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 0.55

Porcelain steel Flame Tamers for some Coleman grills. SET OF SIX.

Part Number: 97371-6X
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: porcelain steel
Weight: 3.3

Stainless steel VapoRiser Bar (V-Bar) for some Coleman grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0024
Dimension Front-to-Back: 5 1/2”
Dimension Side-to-Side: 23 3/8”
Material: stainless steel
Weight: 2.3

Stainless steel Flame Tamers for some Coleman grills. Sold individually, number required varies. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0035
Dimension Front-to-Back: 25 7/8”
Dimension Side-to-Side: 5 1/2”
Material: stainless steel
Weight: 1.4

Flavor grid, stainless steel for some Coleman grills. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0140
Dimension Front-to-Back: 15 3/16”
Dimension Side-to-Side: 5 7/16”
Material: stainless steel
Weight: 0.98

Flame Tamer, stainless steel for some Coleman grills. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.98

SET OF FOUR/4 PACK Flame Tamer, stainless steel for some Coleman grills. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0141-X4
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 3.92

Stainless steel heat plate/Flame Tamer for some Coleman grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 0.72

SET OF THREE/3 PACK Stainless steel heat plate/Flame Tamer for some Coleman grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X3
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.16

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer for some Coleman grills. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use..
WARNING: This is the stainless steel version of 97371. The parts have the same dimensions except this version has a ”height” that is 3/16” taller than 97371. Determine if this matters to you and order the part that best replaces your old heat plate.

Part Number: CLA-TS0157-X4
Dimension Front-to-Back: 14 9/16”
Dimension Side-to-Side: 3 1/4”
Material: stainless steel
Weight: 2.88

Stainless steel Flame Tamer for some Coleman grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 0.90

SET OF THREE/3 PACK Stainless steel Flame Tamer for some Coleman grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X3
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 2.7

SET OF FOUR/4 PACK Stainless steel Flame Tamer for some Coleman grills. Made in USA

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0186-X4
Dimension Front-to-Back: 16 7/8”
Dimension Side-to-Side: 5”
Material: stainless steel
Weight: 3.6

Stainless steel heat tent for some Coleman grills. This new stainless version, far superior to the original porcelain coated bars it replaces, is shown next to the original below. While somewhat different in shape, it is a fully functional replacement and will bolt right in.


Part Number: SCHT-27
Dimension Front-to-Back: 27 11/16”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 2.5

Stainless steel Vap-O-Riser protective burner shields for 9000 series grills for some Coleman grills.

Part Number: VRB-9
Dimension Front-to-Back: 29 1/4”
Dimension Side-to-Side: 4”
Material: stainless steel
Weight: 1.4