DCS 27BQRL

304 Stainless steel 15,000 BTU infrared rotissierie burner. For use with both liquid propane (LP) and natural gas grills. Orifice not included. Use old orifice or purchase our orifice part# CLA-VL0251 for LP, or part# CLA-VB0246 for natural gas applications.

Dimensions:

• Maximum overall length, including mounting tab on one end: 20 7/8”
• Maximum width: 3 3/8”

Replaces DCS factory part# DCS-12021-02

Part Number: CLA-BS0250
Dimensions: 3 3/8” x 20”
Material: stainless steel and ceramic
Weight: 3.50

12022-R CI H Burner.
Cast iron replacement ”H” burner. Fits older DCS 27” grills by Dynamic Cooking Systems.

Replaces original DCS burner part# 12022.

Includes Air Shutter part# DCS-12003-02-R.

Part Number: DCS-12022-R1
Dimensions: 16” x 6 1/4”
Material: cast iron
Weight: 10.9

19014-PC-SS Grill Rack.
Heavy duty stainless steel grill rack. Fits DCS27 and DCS27A Professional Series gas grills by Dynamic Cooking Systems.

• Replaces DCS factory part# 19014-PC.
• Large diameter 5/16” stainless steel rods.
• Commercial grade 304 stainless steel.
• Sold individally.

Part Number: DCS-19014-PC-SS
Dimension Front-to-Back: 18 1/2”
Dimension Side-to-Side: 12 3/4”
Weight: 6.6

30709-020-R Lava Rock Support.
Stainless steel Lava Rock Support. This is a rack/tray for holding Lava Rock (not included). Requires one per burner. Fits DCS 27” DCS27 and DCS27A Professional Series grills. These grills have the smaller 16” cast iron H burners.

• Replaces original DCS part# 30709-020.
• See part# 10312-R for Lava Rock.
• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually.

Part Number: DCS-30709-020-R
Dimensions: 16 1/2” x 10 5/8”
Material: stainless steel
Weight: 2.2

10312-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. Use with Support Rack 30709-020.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-10312-R
Material: pumice
Weight: 7.5

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-13012-06

Part Number: 06020
Material: ceramic
Weight: 0.2

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R
Weight: 0.2

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-13026

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#55 orifice for infrared burners use on natural Gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VB0246
Dimensions: 3 3/8” x 17 1/4”
Material: stainless steel and ceramic
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

Skewers for part 92339 kebob tray.

Part Number: 11040
Weight: 0.4

50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts 94751, 92571 and other simular trays.

Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3