Igniter Components for DCS grills

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your DCS grill.

DCS Igniter Components

Push-Button self-grounding piezo spark generator for some DCS grills. Color varies by manufacturer gray or black. Has round male connector, so connecting wire needs to be female round connector. If needed, see part# 03199C for a short adapter wire that converts flat female spade connectors to female round. For more information, see our help center article Ignition 101.

Part Number: 03100
Weight: 0.1

$6.98



Part# 03100 fits these 20 DCS models:




Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some DCS grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03197
Weight: 0.05

$5.31






Universal 2 5/8” adapter wire with female round and male spade connectors for some DCS grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.
  • Can change male round to male spade
  • Can change female spade to female round
ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03198
Weight: 0.05

$4.30






Rotary piezo spark generator with single round connector outlet for some DCS grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03200
Weight: 0.2

$17.02






Rotary piezo spark generator for some DCS grills. Two round connector leads send spark to both main burners.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03220
Weight: 0.2

$18.30



Part# 03220 fits these 1 DCS models:




Universal battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has one (1) terminal (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole.
  • See part number SBB00047 for ignitor that uses a longer lasting AA battery and requires a 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03310
Weight: 0.3

$15.06






Universal volt battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has two (2) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03320
Weight: 0.3

$22.80






Universal battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has three (3) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03330
Weight: 0.5

$16.16






Universal three-outlet battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has three (3) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03333
Weight: 0.5
Dimensions: 2 9/16” x 2”

$35.57






Universal battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has (5) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03335
Weight: 0.3
Dimensions: 2 5/8” x 2”

$42.71






Universal four-outlet battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has four (4) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03340
Weight: 0.5

$35.57






Universal battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has six (6) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03350
Weight: 0.7

$37.92






Battery powered 9-volt spark generator with six outlets and remote push-button for some DCS grills. Wiring not included.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03360
Weight: 0.7

$70.18






4-outlet 9 volt spark generator for some DCS grills. Use jumper wire 03197 for 2-outlet applications.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03370
Weight: 0.5
Dimensions: 3 7/8” x 2”

$62.62






Universal battery powered push button ignitor for some DCS grills.
  • 1.5 volt
  • Has five (5) terminals (male spade connector)
  • Uses a single AA battery (not included))
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Overall dimensions: 2” x 3 3/8” x 3”
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03380
Weight: 0.7
Dimensions: 3 5/16” x 2”

$44.93






Ignition connection wire used to connect battery powered spark generators to electrodes for some DCS grills. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29



Part# 03610 fits these 54 DCS models:




Ignition connection wires used to connect battery powered spark generators to electrodes for some DCS grills. SET OF FOUR (4) 46” wires.

  • Each wire has female spade connectors on one end and square plastic connectors on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610-X4
Weight: 0.2

$30.92






14” ground wire with female spade connector and eye connectors for some DCS grills. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61



Part# 03620 fits these 20 DCS models:




Universal adapter wire with male round and female spade connectors for some DCS grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03751
Weight: 0.05

$3.98






Igniter electrode kit for some DCS grills. Sold individually. Fits both left and right hand side.
    Includes:
  • Collector box (replaces OEM part 32801 and 32210-01)
  • Electrode with ceramic insulator and 30” wire (replaces OEM parts 16281, 16281-02, and 16281-03)
  • Small sex change wire with female spade connector and male round connector. Required for some grills that use a female spade connection to the ignitor.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 04850
Material: ceramic
Weight: 0.2

$27.81



Part# 04850 fits these 148 DCS models:




Igniter electrode kit for use on DCS models with cast iron burners.
  • Collector box
  • Electrode with ceramic insulator
  • 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 06020
Material: ceramic
Weight: 0.2

$13.89



Part# 06020 fits these 117 DCS models:




16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.
  • Replaces factory part# 16190
  • Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-16190-R
Weight: 0.2

$17.02



Part# DCS-16190-R fits these 64 DCS models:




18350-R IGNITION MODULE 4 OUTPUTS (BQR MOD) for some DCS grills.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.
  • Replaces factory part 18350
  • Includes 18353 Ignition button
  • Requires 9V battery (not included)
  • Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-18350-R
Weight: 0.40

$62.62



Part# DCS-18350-R fits these 10 DCS models:




18351-R Ignition Module 6 Outputs (36-BQAR,48-BQR) or Battery Igniter for some DCS grills.
9 volt spark generator with remote push button. Fits BG36, BG48, BGA36, BGA48, BGB36, and BGB48 series Professional grills that require a 6 outlet igniter.
  • Replaces factory part 18351
  • Includes 18353 ignition button
  • Requires 9V battery (not included)
  • Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-18351-R
Weight: 0.7

$70.18



Part# DCS-18351-R fits these 21 DCS models:




212333-R BATTERY IGN MODULE 9V ELTEC 4 for some DCS grills.
9 volt spark generator with remote push button. Fits BG27, BGA27 and BGB30 series Professional grills that require a 4 outlet igniter.
  • Replaces factory part 212333
  • Includes 212336 Igniter switch (button)
  • Requires 9V battery (not included)
  • Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-212333-R
Weight: 0.40

$62.62



Part# DCS-212333-R fits these 18 DCS models:




212334-R BATTERY IGN MODULE 9V ELTEC 6 for some DCS grills.
9 volt spark generator with remote push button. Fits BG36, BG48, BGA36, BGA48, BGB36, and BGB48 series Professional grills that require a 6 outlet igniter.
  • Replaces factory part 212334
  • Includes 212336 Igniter switch (button)
  • Requires 9V battery (not included)
  • Sold individually

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-212334-R
Weight: 0.7

$70.18



Part# DCS-212334-R fits these 27 DCS models:




219343-R KIT, ROTARY IGNITER & KNOB BBQ.
Single outlet rotary igniter for DCS Professional Series grills by Fisher Pay& Kaypel.
  • Replaces factory part# 219348
  • Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: DCS-219343-R
Weight: 0.12

$17.02



Part# DCS-219343-R fits these 45 DCS models:




Universal collector box with electrode and wire for some DCS grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-15B
Weight: 0.3

$15.59






46” Wire with female spade connectors and square plastic connectors for some DCS grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Weight: 0.1
Dimensions: 46

$8.29






Universal 2 1/2” adaptor wire with a round female end and a male spade end for some DCS grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-46B
Weight: 0.10
Dimensions: 2 1/2

$4.30






DCS (9 Volt) 4-Prong Spark Generator

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IGEIB14-B
Weight: 0.40

$62.62



Part# IGEIB14-B fits these 19 DCS models:




Universal push-button igniter for some DCS grills. Round male connector. Includes locking nut. Color can varies gray or black by manufacturer.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-4B
Weight: 0.3

$6.98






Universal 3 outlet rotary spark generator for some DCS grills. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: UP-8B
Weight: 0.3

$23.13




We can ship parts for DCS gas BBQ grills worldwide



Back to DCS grill parts


GRILLING  ACCESSORIES

Replacement parts orders for DCS grills $79 and over shipped to the USA (contiguous 48 states only) FREE

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy