DCS 48A-BQAS

30639-1-R Smoker burner.
Stainless steel replacement smoker burner.

Fits DCS 36A and 48A Professional Series grills. Replaces original DCS part# 30639.

.

Part Number: DCS-30639-R1
Dimensions: 18” x 1”
Material: stainless steel
Weight: 1.0

12012-02-R CI H Burner.
Cast iron replacement ”H” burner. Fits older DCS 36” and 48” grills by Dynamic Cooking Systems.

Replaces original DCS burner part# 12012-02.

Includes Air Shutter part# DCS-12003-02-R.

Part Number: DCS-12012-02-R1
Dimensions: 20 1/2” x 6 1/4”
Material: cast iron
Weight: 13.6

12003-02-R Air shutter. Fits cast iron ”H” burners used on older DCS 27”, 36” and 48” Professional Series grills.

Replaces original DCS part# 12003-02.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.<.p> Made in USA .

Part Number: DCS-12003-02-R
Material: stainless steel
Weight: 0.05

19006-R Grill Rack.
Heavy duty porcelain steel grill rack. Fits DCS36, DCS36A, DCS48, and DCS48A Professional Series gas grills. Sometimes referred to as GRILL RACK - 36/48 BBQ-BLK.

• Replaces DCS factory part# 19006.
• Large diameter 5/16” porcelain steel rods.
• Sold individually.

Part Number: DCS-19006-R
Dimension Front-to-Back: 20 1/2”
Dimension Side-to-Side: 10 7/16”
Material: porcelain steel
Weight: 10.11

30522-R Lava Rock Support.
Stainless steel Lava Rock support tray. Fits DCS DCS36, DCS36A, DCS48, DCS48A Professional Series grills by Dynamic Cooking systems. These grills have the larger 20.5” cast iron H burners.

Replaces original DCS part# 30522.

• Sometimes shipped with vinyl peel-off coating. Remove before use.
• Made in USA
• Sold individually, number required varies

Part Number: DCS-30522-R
Dimensions: 19” x 9 9/16”
Material: stainless steel
Weight: 2.2

10312-R LAVA ROCK.
Natural lava rock processed and screened for uniformity. Use with Support Rack 30709-020.

NOTE: This is NOT a DCS product. The original DCS part was 4 pounds of Lava Rock. This is a 7lb bag manufactured by GrillPro.

Part Number: DCS-10312-R
Material: pumice
Weight: 7.5

16190-R KIT, ROTARY IGNITER & KNOB BBQ. Single outlet rotary igniter for DCS Professional Series grills by Dynamic Cooking Systems.

• Replaces factory part# 16190
• Includes Igniter, knob, and mounting screws

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DCS-16190-R
Weight: 0.2

Igniter electrode kit for use on DCS models with cast iron burners.

• Collector box
• Electrode with ceramic insulator
• 15” wire with round connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces DCS factory part# DCS-13012-6

Part Number: 06020
Material: ceramic
Weight: 0.2

24” LP hose and regulator with QCC-1 connection.

• For use on ”new style” QCC-1 tanks.
• Consists of hose part# 01000 and regulator part# 00920.
• Hose end with SAE 3/8” female flare fitting connects to grill.

Note: The grill must have a matching SAE 3/8” male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8” fitting is much larger, approximately 5/8”. See our flare fitting description for information on measuring and sizes.

Replaces DCS factory part# DCS-13026-01

Part Number: 80012
Dimensions: 23 1/2” x 0 1/2”
Weight: 0.80

Brass valve for DCS.

• For LP and natural gas grills (see below)
• Off position D-Value: 12 o'clock
• Stem diameter: 8mm
• Orifice not included

NOTE: There is a set screw in the stem that allows this valve to be used in both LP or natural gas grills. The valve is shipped with the screw set in LP position. Turn the screw counterclockwise about seven turns for natural gas use.

Replaces DCS factory part# DCS-13017

Part Number: 30171
Dimensions: 3 7/16” x 1 5/16”
Material: brass
Weight: 0.3

#59 brass orifice for rotisserie burner. Fits liquid propane (LP) gas grills. Includes brass elbow with 1/4” compression fitting.

Replaces DCS factory part# DCS-18020-02

Part Number: CLA-VL0251
Material: brass
Weight: 0.15

32038-R Smoker burner tray.
Stainless steel wood chip tray for smoking.

Fits DCS 36A and48A Professional Series grills by Dymaniv Cooking Systems. Replaces original DCS part# 32038.

.

Part Number: DCS-32038-R
Material: stainless steel
Weight: 0.40

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17” x 26”.

• Top quality product
• Each briquette measure 2” x 2”
• Self cleaning
• Great heat distibution, retains heat longer
• Can be used on all grills that use briquettes or lava rock
• Use a single layer (multiple layers can reduce temperatures)

NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.

• 59 briquetes covers an area apprimately 15” x 24”
• 70 briquetes covers an area apprimately 17” x 26”
• 90 briquetes covers an area apprimately 17” x 33”

Made in USA

Part Number: CLA-AC0399
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2