Home > Ducane Grill Models > Ducane 802S
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Ducane grill.
Replacement grill parts to fit Ducane model: 802S
802S Burners
U burner support bracket. Replaces OEM# 20175501. Sold indivually. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0057
Material: stainless steel
Weight: 0.05
$1.79
C burner support bracket. Replaces OEM# G4162359. Sold indivually. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0058
Material: stainless steel
Weight: 0.05
$2.80
802S Cooking Grids
Porcelain coated
cooking grid for Ducane model 802S.
Part Number: 51362
Dimension Front-to-Back: 14 3/4”
Dimension Side-to-Side: 20 1/2”
Material: porcelain steel wire
Weight: 4.6
$52.30
802S LA-VA-GRATES
20172501-R LA-VA-GRATE. Stainless steel rack for supporting ceramic briquettes and lava rock.
Fits 800, 802, 804, 805, 1000, 1005, 1200, 1202, 1204, 1205, 2004 and 2005 series grill heads by Ducane. May fit other models.
- Replaces original part# 20172501
- Also known as part# G4313454 and Kit# B29E
- Commercial grade stainless steel
The function of the 20172501-R Lava Grate is to catch and vaporize the juices which are not absorbed by the briquettes while grilling, therefore eliminating the need for a messy and unsightly grease container.
See part# 20172201 for genuine Ducane Pyromid Briquettes for this Lava Grate.
Part Number: 20172501-R
Dimensions: 14 1/8” x 20 1/8”
Material: stainless steel
Weight: 4.0
$104.46
20172201 Ducane Pyromid® briquettes. Bag of 59 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill
Fits Ducane 800, 1000, 1200, and 2000 series grills, and all models using La-Va-Grate part# 20172501.
Part Number: 20172201
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.65
$48.29
20172501-KIT LA-VA-GRATE and Pyromid® Briquettes.
Kit includes:- 20172501-R Stainless steel Lava Grate for supporting ceramic briquettes and lava rock.
Fits 800, 802, 804, 805, 1000, 1005, 1200, 1202, 1204, 1205, 2004 and 2005 series grill heads by Ducane.
- Replaces original part# 20172501
- Also known as part# G4313454
- Commercial grade stainless steel
20172201 Ducane Pyromid® briquettes. Bag of 59 high quality pyromid-shaped, flat-top ceramic pieces. These are the same OEM factory briquettes that came with your new Ducane grill
Fits Ducane 800, 1000, 1200, and 2000 series grills, and all models using Lava Grate part# 20172501.
Part Number: 20172501-KIT
Dimensions: 14 1/8” x 20 1/8”
Material: stainless steel
Weight: 11.65
$142.02
802S Knobs and Handles
Black control knob.
- Off position D-Value: 12 o'clock
- Knob diameter: 1 15/16”
- Socket diameter: 8mm
- Knob shaft: 3/4”
Part Number: 03203
Dimensions: 1 15/16” x 1 15/16”
Material: plastic
Weight: 0.1
$11.77
Universal durable black phenolic lid handle with threaded brass insert. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.
Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3
$8.12
802S Valves, Orifices, and Manifolds
Natural gas brass valve. Replaces Ducane OEM part #G1827575, others. Orifice not included. Use original orifice or our part #37900 drilled to size.
Part Number: 37700
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3
$42.10
LP brass valve. Replaces Ducane OEM LP gas valve part# G1827566, others. Orifice not included. Use original orifice or our part #37900 drilled to size.
Part Number: 37800
Dimensions: 2 11/16” x 1 7/8”
Material: brass
Weight: 0.3
$42.10
Brass
hood orifice with #72
starter hole and 1/8” x 22 threading for use with valves 37700, 37800, and 38800. Must be drilled to proper
drill size.
If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.
Part Number: 37900
Dimensions: 0 3/4” x 0 1/2”
Material: brass
Weight: 0.1
$9.17
802S Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
High quality, long lasting ceramic briquettes. 70 flat top pyramid-shaped briquettes per box. Placed 1/2” apart, 70 briquetes will cover about 437 square inches. This is an area roughly 17” x 26”.
- Top quality product
- Each briquette measure 2” x 2”
- Self cleaning
- Great heat distibution, retains heat longer
- Can be used on all grills that use briquettes or lava rock
- Use a single layer (multiple layers can reduce temperatures)
NOTE: These high quality ceramic briquetes are available in 59 count, 70 count, and 90 count qantities.
- 59 briquetes covers an area apprimately 15” x 24”
- 70 briquetes covers an area apprimately 17” x 26”
- 90 briquetes covers an area apprimately 17” x 33”
Made in USA Part Number: CLA-AC0399
Dimensions: 2” x 2”
Material: ceramic
Weight: 9.75
$63.34 $56.40
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57