Dyna-Glo DGP350SNP-D

112-03003-R Main Burner - Left. Stainless steel. Fits Dyna-Glo DGP350SNP. May fit other models.

This part replaces original Dyna-Glo burner # 112-03003.

Part Number: DG1-112-03003-R
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 0.9

112-03004-R Main Burner - Right. Stainless steel. Fits Dyna-Glo DGP350SNP. May fit other models.

This part replaces original Dyna-Glo burner # 112-03004.

Part Number: DG1-112-03004-R
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 0.9

112-03003-SET Main Burners. Set of two (2) burners, a left and right burner pair. Stainless steel. Fits Dyna-Glo DGP350SNP. May fit other models.

This part replaces original Dyna-Glo burner # 112-03003 (left burner) and 112-03004 (right burner).

Part Number: DG1-112-03003-SET
Dimensions: 15 5/8” x 4 3/8”
Material: stainless steel
Weight: 1.8

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.

Part Number: 67241-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: porcelain cast iron
Weight: 5.55

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69762-UNI-X2 for a set of two (2) grids.

Part Number: 69762-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 6.95

101-03011-R Cooking Grate. Porcelain treated matte finish cast iron grates. Sold as a 2-piece set.

Fits Dyna-Glo DGP350 and DGB700 series grills. May fit other models.

This grate replaces original Dyna-Glo part 101-03011.

Part Number: DG1-101-03011-R
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 7.10

101-03005-R-X2 Heat tent. Set of two (2). Porcelain enameled steel.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-03005.

Part Number: DG1-101-03005-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 2.0

101-03005-R Heat tent. Porcelain enameled steel. Sold individually.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-03005.

Part Number: DG1-101-03005-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: porcelain steel
Weight: 1.0

101-00301-04-R-X2 Heat tent. Set of two (2). Stainless steel.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-101-03001-04-R-X2
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 1.96

101-00301-04-R Heat tent. Stainless steel. Sold individually.

Fits Dyna-Glo DGP350SNP and DGP700SSB model grills. May fit other models.

This heat tent replaces original Dyna-Glo part 101-00301-04.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Made in USA

Part Number: DG3-101-03001-04-R
Dimension Front-to-Back: 14 7/8”
Dimension Side-to-Side: 6 1/4”
Material: stainless steel
Weight: 0.98

102-03013-R Ignition electrode and ignition wire assembly. Fits Dyna-Glo DGP350 and DGP700 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-102-03013-R
Material: ceramic
Weight: 0.1

Grease pan with a new design made of stainless steel and not an exact duplicate of the original; is a fully functional replacement. Includes grease cup and grease cup holder. Made in USA .

NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.

Replaces Dyna-Glo factory part# DYG-102-04013

Part Number: CLA-DS0279
Dimensions: 7 1/8” x 19 5/16”
Material: stainless steel
Weight: 2.7

Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.

• Far superior to the original porcelain coated steel rack
• Rests on your existing cooking grids.
• Solid 1/4” 304 stainless steel rods.
• Stands 3.75 inches tall.
• Made in USA .

WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?

• Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
• Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
  
  Part Number: CLA-WS0040
  Dimensions: 6 1/4” x 22 7/8”
  Material: stainless steel
  Weight: 4.8

Bracket for heat plates, screws & nuts included. Four needed per grill, SOLD INDIVIDUALLY. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-MS0330
Dimensions: 2 5/8” x 1 1/16”
Material: stainless steel
Weight: 0.05

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.

Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7