Dyna-Glo Igniter Components. Replacement Igniter Components for Dyna-Glo grills. FREE shipping.

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Dyna-Glo grill.

Dyna-Glo Igniter Components

Electrode

For more information about ignition systems and components, please see article Ignition 101 in our help center for some Dyna-Glo grills.

Part Number: 00161
Dimensions: 3 1/2” x 0 7/8”
Material: ceramic
Weight: 1.0

$7.31

SearPLUS™ burner sparker for some Dyna-Glo grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 02361
Dimensions: 3 1/4
Material: ceramic
Weight: 0.1

Image not available

$10.21

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Dyna-Glo grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

$4.65

Universal 2 5/8” adapter wire with female round and male spade connectors for some Dyna-Glo grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

Can change male round to male spade
Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

$5.35

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Dyna-Glo grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

$4.37

Universal battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has one (1) terminal (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03310
Weight: 0.3

$16.95

Universal volt battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

$27.78

Universal battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03330
Weight: 0.5

$18.48

Universal three-outlet battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

$33.89

Universal battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has (5) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3

$19.43

Universal four-outlet battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Universal battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

$31.96

Universal battery powered push button ignitor for some Dyna-Glo grills.

1.5 volt
Has five (5) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$38.00

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors) for some Dyna-Glo grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

$5.35

Ignition connection wire used to connect battery powered spark generators to electrodes for some Dyna-Glo grills. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors for some Dyna-Glo grills. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Universal adapter wire with male round and female spade connectors for some Dyna-Glo grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

$3.84

Burner mounted electrode with male spade connector for some Dyna-Glo grills. Includes small mounting bolt and nut.

Wire not included. Commonly used with wire part# 03610.
Female spade connector on wire connects to male spade connector of electrode.
If used with existing wire, confirm connecting end of wire is a female spade connector
Usually, one electrode required per burner

NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04010-X2, X3, X4, and X5.

Part Number: 04010
Material: ceramic
Weight: 0.05

$6.58

Burner mounted electrode for some Dyna-Glo grills. Mounts to flange on underside of burner.

Ceramic insulator
Mounting bracket with nut and bolt
8” wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04820
Material: ceramic
Weight: 0.1

$6.81

101-03001-12-R Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Includes 8” wire. Fits Dyna-Glo DGP350NP grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 101-03001-12.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-101-03001-12-R
Material: ceramic
Weight: 0.1

$6.81

101-03001-12-R-X2 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of two (2). Includes 8” wire. Fits Dyna-Glo DGP350NP grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 101-03001-12.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-101-03001-12-R-X2
Material: ceramic
Weight: 0.2

$13.42

102-03013-R Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Fits Dyna-Glo DGP350 and DGP700 series grills. Includes 8” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 102-03013.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-102-03013-R
Material: ceramic
Weight: 0.1

$6.81

104-13007-R Electronic ignition for some Dyna-Glo grills. Three-outlet battery powered push button ignitor. Fits Dyna-Glo DGB390 series grills. May fit other models.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 104-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13007-R
Dimensions: 2 9/16” x 2”
Weight: 0.5

$18.48

104-13012-R Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R
Material: ceramic
Weight: 0.1

$12.47

104-13012-R-X3 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of three (3). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB390 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 104-13012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-104-13012-R-X3
Material: ceramic
Weight: 0.1

$35.10

105-13007-R Electronic Ignitor for some Dyna-Glo grills. Battery powered push button ignitor. Fits Dyna-Glo DGE530 series grills. May fit other models.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”

This Electronic Ignition Module replaces original Dyna-Glo part 05-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13007-R
Weight: 0.7

$31.96

105-13012-R Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R
Material: ceramic
Weight: 0.1

$12.47

105-13012-R-X4 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X4
Material: ceramic
Weight: 0.4

$45.04

105-13012-R-X5 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of five (5) Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGE486, DGE530 and M486 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 105-13012 (long wire) and 105-13017 (short wire).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-105-13012-R-X5
Material: ceramic
Weight: 0.5

$55.19

113-03020-R Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R
Material: ceramic
Weight: 0.1

$12.47

113-03020-R-X4 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of four (4). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X4
Material: ceramic
Weight: 0.1

$45.04

113-03020-R-X5 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of five (5). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGA480 and DGA550 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo Electrode 113-03020 and Wire 113-03017.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-113-03020-R-X5
Material: ceramic
Weight: 0.1

$55.19

144-13007-R Electronic ignition for some Dyna-Glo grills. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13007-R
Weight: 0.3

$16.46

144-13012-R Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R
Material: ceramic
Weight: 0.1

$12.47

144-13012-R-X2 Ignition electrode and ignition wire assembly for some Dyna-Glo grills. Set of two (2). Includes electrode 43” wire. Also includes a short gender changer wire (not used in most applications). Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

This Ignition electrode replaces original Dyna-Glo part 144-13012 and 144-23012.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-144-13012-R-X2
Material: ceramic
Weight: 0.2

$23.89

DG1-166-13007-R Electronic Ignitor for some Dyna-Glo grills. Battery powered push button ignitor. Fits Dyna-Glo DGE486, DGF486, and M486 series grills. May fit other models.

1.5 volt
Has five (5) outlets (male spade connector)
Uses a single AAA battery (not included))
Requires 3/4” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”.

This Electronic Ignition Module replaces original Dyna-Glo part 166-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-166-13007-R
Weight: 0.7

$19.43

70-03-102-R Ignition electrode and ignition wire for some Dyna-Glo grills. Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R
Material: ceramic
Weight: 0.05

$9.42

70-03-102-R-X5 Ignition electrode and ignition wire for some Dyna-Glo grills. Set of five (5). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R-X5
Material: ceramic
Weight: 0.05

$43.13

70-03-102-R-X6 Ignition electrode and ignition wire for some Dyna-Glo grills. Set of six (6). Fits Dyna-Glo DGF510SSP, DGF600SSP grill models. Includes 20” wire. May fit other models.

This Ignition electrode replaces original Dyna-Glo parts 70-03-102, 70-03-103, 70-03-104, and 70-03-109.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-102-R-X6
Material: ceramic
Weight: 0.05

$49.81

70-03-105-R Electronic Ignitor for some Dyna-Glo grills. Battery powered push button ignitor. Fits Dyna-Glo DGF510 series grills. May fit other models.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”

This Electronic Ignition Module replaces original Dyna-Glo part 70-03-105.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG1-70-03-105-R
Weight: 0.7

$31.96

144-13007-R Electronic ignition for some Dyna-Glo grills. Battery powered push button ignitor. Fits Dyna-Glo DGB730 and M365 series grills. May fit other models.

1.5 volt
Has two (2) outlets
Uses 1 AAA battery (not included)

This Electronic Ignition Module replaces original Dyna-Glo part 144-13007.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: DG2-144-13007-R
Weight: 0.3

$16.46

Universal collector box with electrode and wire for some Dyna-Glo grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3

$13.71

46” Wire with female spade connectors and square plastic connectors for some Dyna-Glo grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

Push-button electronic igniter with two (2) spade connectors for some Dyna-Glo grills. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

$16.46

Push-button electronic igniter with three (3) spade connectors for some Dyna-Glo grills. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG3007
Weight: 0.2

$37.10

$14.99

Universal 3 outlet rotary spark generator for some Dyna-Glo grills. Includes knob.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: UP-8B
Weight: 0.3

$21.96

We can ship parts for Dyna-Glo gas BBQ grills worldwide

Back to Dyna-Glo grill parts

GRILLING ACCESSORIES

Briquettes & Lava Rock

Grill Covers

Grilling Tools

Basting and Cleaning brushes

Wood Chips and Smoker Trays

Grid Toppers, Griddles & Racks

Fish and burger baskets

Grill and Tank Accessories

Shish-kebab Sets & Skewers

Grilling & outdoor cooking books

Part# 03610 fits these 35 Dyna-Glo models:
DGA550SSN DGA550SSN-D DGA550SSP DGA550SSP-D DGB730SNB DGB730SNB-D DGE486BNP	DGE486BNP-D DGE486BSP DGE486BSP-D DGE486GSP DGE486GSP-D DGE486SSP-D DGE530BSP-D	DGE530GSP DGE530GSP-D DGE530SSP DGE530SSP-D DGF486CSP DGF486CSP-D DGF486GRP	DGF486GRP-D DGF486GSP DGF487GRP DGF510SSP DGF510SSP-D DGF530SRP M365GMDG14	M365GMDG14-D M486BBDG14 M486BBDG14-D M486GMDG14 M486GMDG14-D M486RDDG14 M486RDDG14-D

Part# 03620 fits these 35 Dyna-Glo models:
DGA550SSN DGA550SSN-D DGA550SSP DGA550SSP-D DGB730SNB DGB730SNB-D DGE486BNP	DGE486BNP-D DGE486BSP DGE486BSP-D DGE486GSP DGE486GSP-D DGE486SSP-D DGE530BSP-D	DGE530GSP DGE530GSP-D DGE530SSP DGE530SSP-D DGF486CSP DGF486CSP-D DGF486GRP	DGF486GRP-D DGF486GSP DGF487GRP DGF510SSP DGF510SSP-D DGF530SRP M365GMDG14	M365GMDG14-D M486BBDG14 M486BBDG14-D M486GMDG14 M486GMDG14-D M486RDDG14 M486RDDG14-D

Part# 04010 fits these 10 Dyna-Glo models:
DGB610SSP DGF493BNP	DGF493PNP-D DGF510PBP	DGF510PBP-D DGF510SBP	DGF510SSP DGF510SSP-D	DGH483CRP DGH483CRP-D

Part# DG1-102-03013-R fits these 4 Dyna-Glo models:
DGP350SNP	DGP350SNP-D	DGP700SSB	DGP700SSB-D

Part# DG1-104-13007-R fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

Part# 02361 fits these 2 Dyna-Glo models:
DGH483CRP	DGH483CRP-D

Part# DG1-101-03001-12-R fits these 2 Dyna-Glo models:
DGP350NP	DGP350NP-D

Part# DG1-101-03001-12-R-X2 fits these 2 Dyna-Glo models:
DGP350NP	DGP350NP-D

Part# DG1-104-13012-R fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

Part# DG1-104-13012-R-X3 fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D

Part# DG1-105-13007-R fits these 6 Dyna-Glo models:
DGE530BSP-D DGE530GSP	DGE530GSP-D DGE530SSP	DGE530SSP-D DGF530SRP

Part# DG1-105-13012-R fits these 25 Dyna-Glo models:
DGE486BNP DGE486BNP-D DGE486BSP DGE486BSP-D DGE486GSP	DGE486GSP-D DGE486SSP-D DGE530BSP-D DGE530GSP DGE530GSP-D	DGE530SSP DGE530SSP-D DGF486CSP DGF486CSP-D DGF486GRP	DGF486GRP-D DGF486GSP DGF487GRP DGF530SRP M486BBDG14	M486BBDG14-D M486GMDG14 M486GMDG14-D M486RDDG14 M486RDDG14-D

Part# DG1-105-13012-R-X4 fits these 18 Dyna-Glo models:
DGE486BNP DGE486BNP-D DGE486BSP DGE486BSP-D	DGE486GSP DGE486GSP-D DGE486SSP-D DGF486CSP	DGF486CSP-D DGF486GSP DGF487GRP DGF530SRP	M486BBDG14 M486BBDG14-D M486GMDG14 M486GMDG14-D	M486RDDG14 M486RDDG14-D

Part# DG1-105-13012-R-X5 fits these 5 Dyna-Glo models:
DGE530BSP-D	DGE530GSP	DGE530GSP-D	DGE530SSP	DGE530SSP-D

Part# DG1-113-03020-R fits these 11 Dyna-Glo models:
DGA480BSN DGA480BSP DGA480BSP-D	DGA480SSN DGA480SSN-D DGA480SSP	DGA480SSP-D DGA550SSN DGA550SSN-D	DGA550SSP DGA550SSP-D

Part# DG1-113-03020-R-X4 fits these 6 Dyna-Glo models:
DGA480BSN DGA480BSP	DGA480BSP-D DGA480SSN	DGA480SSN-D DGA480SSP

Part# DG1-113-03020-R-X5 fits these 5 Dyna-Glo models:
DGA480SSP-D	DGA550SSN	DGA550SSN-D	DGA550SSP	DGA550SSP-D

Part# DG1-144-13007-R fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

Part# DG1-144-13012-R fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

Part# DG1-144-13012-R-X2 fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

Part# DG1-166-13007-R fits these 19 Dyna-Glo models:
DGE486BNP DGE486BNP-D DGE486BSP DGE486BSP-D	DGE486GSP DGE486GSP-D DGE486SSP-D DGF486CSP	DGF486CSP-D DGF486GRP DGF486GRP-D DGF486GSP	DGF487GRP M486BBDG14 M486BBDG14-D M486GMDG14	M486GMDG14-D M486RDDG14 M486RDDG14-D

Part# DG1-70-03-102-R fits these 3 Dyna-Glo models:
DGF510SSP	DGF510SSP-D	DGF600SSP

Part# DG1-70-03-102-R-X5 fits these 2 Dyna-Glo models:
DGF510SSP	DGF510SSP-D

Part# DG1-70-03-102-R-X6 fits these 1 Dyna-Glo models:
DGF600SSP

Part# DG1-70-03-105-R fits these 2 Dyna-Glo models:
DGF510SSP	DGF510SSP-D

Part# IG-30B fits these 8 Dyna-Glo models:
DGE530BSP-D DGE530GSP	DGE530GSP-D DGE530SSP	DGE530SSP-D DGF510SSP	DGF510SSP-D DGF530SRP

Part# TS-IG2006 fits these 4 Dyna-Glo models:
DGB730SNB	DGB730SNB-D	M365GMDG14	M365GMDG14-D

Part# TS-IG3007 fits these 3 Dyna-Glo models:
DGB390BNP	DGB390BNP-D	DGB390SNP-D