Home > Fiesta Grill Models > Fiesta ET34540Fiesta Dynasty Series Twin-Burner LP gas grill
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Fiesta grill. This is best done with the old parts out of the grill. Verify your Fiesta grill model number.
Part diagrams and owners manuals for Fiesta model: ET34540 (Dynasty)
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Fiesta model: ET34540 (Dynasty)
ET34540 (Dynasty) Burners
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Replaces Fiesta factory part# SM202-12
Part Number: 19202-79202
Dimensions: 22” x 7 7/8”
Material: stainless steel
Weight: 3.5
$70.95
Stainless steel H burner. Burner consists of two pieces, which are held together by the venturi.
Part Number: 19202
Dimensions: 22” x 7 7/8”
Material: stainless steel
Weight: 2.4
$65.76
ET34540 (Dynasty) Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
L-shaped twin venturi. Includes all necessary gaskets and screws/nuts.
Part Number: 79202
Dimensions: 4 1/2” x 2 7/8”
Material: zinc plated steel
Weight: 0.8
$17.41
ET34540 (Dynasty) Rock Grates
carbon steel
rock grate for Fiesta model ET34540.
Part Number: 93301
Dimensions: 12” x 19 1/4”
Material: steel wire
Weight: 4.1
$27.27
ET34540 (Dynasty) Igniter Components
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Electrode kit.
- Mounting bracket
- Electrode with ceramic insulator
- Wire with round connector
- Protective sleeve
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04300
Material: ceramic
Weight: 0.1
$8.81
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
Snap In
Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
ET34540 (Dynasty) Knobs and Handles
Genuine OEM Fiesta control knob.
- Off position D-Value: 6 o'clock
- Knob diameter: 2”
- Socket diameter: 5/16”
- Knob shaft: None (flat)
Part Number: SP7-7
Weight: 0.1
$5.15
ET34540 (Dynasty) Accessories
Durable 2 5/16” round briquettes
- Self-cleaning
- Control flare-ups while holding an even heat pattern.
- About 53 pieces, covers approximately 275 sq. inches.
- Fits all gas grills
Part Number: BQ-5
Weight: 7.2
$31.19
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
$24.48
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2” x 10” long
Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1
$19.30
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73