Home > Grand Hall Grill Models > Grand Hall HGI08ALP
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Grand Hall grill.
Replacement gas grill parts for Grand Hall model: HGI08ALP
HGI08ALP Burners
Stainless steel tube burner. Includes
- SS tube burner
- Electrode mounting bracket (not all models use bracket)
- Spider exclusion screen
- Adjustable air shutter.
Replaces Grand Hall factory part# P02008032A
Part Number: 10241
Dimensions: 14 3/4” x 1 1/8”
Material: stainless steel
Weight: 0.7
$35.35
HGI08ALP Cooking Grids
Stainless steel
cooking grid set.
- 5/16” diameter stainless rods
- 304 stainless steel
Replaces Grand Hall factory part# P01604031B
Part Number: 506S3
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 32 3/8”
Material: stainless steel
Weight: 15.1
$195.93
HGI08ALP Savor Plates
Stainless steel Savor Plate, also known as Flamer Tamer and
Heat Plate. Sold individually. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Replaces Grand Hall factory part# P017080074
Part Number: CLA-TS0314
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 4 1/16”
Material: stainless steel
Weight: .75
$27.28
Stainless steel
heat plate; also referred to as a flame tamer and savor plate for Grand Hall model HGI08ALP.
Replaces Grand Hall factory part# P017080074
Part Number: SCHP4
Dimension Front-to-Back: 16 3/8”
Dimension Side-to-Side: 3 13/16”
Material: stainless steel
Weight: 1.0
$27.28
HGI08ALP Igniter Components
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Ignitor collector box with ceramic electrode and male
round connector.
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
See part 02623-X4 for a more econimical 4 pack.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Grand Hall factory part# P02609010B
Part Number: 02623
Material: ceramic
Weight: 0.2
$10.87
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Grand Hall factory part# P02502265C
Part Number: 03350
Weight: 0.7
$31.96
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
HGI08ALP Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96