Parts for Grand Hall SS64-NG

Home > Grand Hall Grill Models > Grand Hall SS64-NG

Grill Chef 3-Burner LP gas grill with side and back burners

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Grand Hall grill.

Part diagrams and owners manuals for Grand Hall model: SS64-NG

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Exploded parts diagram for model: SS64-NG

Replacement grill parts for Grand Hall model: SS64-NG

SS64-NG Burners

Stainless steel tube burner. Includes

SS tube burner
Electrode mounting bracket (not all models use bracket)
Spider exclusion screen
Adjustable air shutter.

Replaces Grand Hall factory part# P02008024A

Part Number: 10241
Dimensions: 14 3/4” x 1 1/8”
Material: stainless steel
Weight: 0.7

stainless steel burner for Grand Hall model SS64-NG

$35.35

All Grand Hall Burners

SS64-NG Burner Brackets and Carryovers

Stainless steel burner mounting bracket with integrated gas carryover tubes. Made in USA

Replaces Grand Hall factory part# P0220505ED

Part Number: CLA-MS0108
Dimensions: 31 7/8
Material: stainless steel
Weight: 1.5

$109.61

All Grand Hall Burner Brackets and Carryovers

SS64-NG Cooking Grids

Cast iron cooking grids (set of 2). Porcelain enameled, glossy finish.

Replaces Grand Hall factory part# P01615015A

Part Number: 60662
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 23 1/2”
Material: gloss cast iron
Weight: 13.14

$86.19

Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.

Each panel measures:

Front-to-Back: 16 15/16”
Side-to-Side: 11 3/4”

Total Side-to-Side: 23 1/2”

Part Number: 60662-UNI-X2
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 23 1/2”
Material: cast iron
Weight: 14.30

$92.71

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60662-UNI-X2 for a set of two (2).

Part Number: 60662-UNI
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 7.15

$52.49

Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually, number required varies.

Part Number: 60663-1PC
Dimension Front-to-Back: 16 15/16”
Dimension Side-to-Side: 11 3/4”
Material: cast iron
Weight: 6.7

$49.38

All Grand Hall Cooking Grids

SS64-NG Savor Plates

Stainless steel Savor Plate.
NOTE: Depending on the brand and model of the grill it is used on, this part is known as a Flame Tamer, Savor Plate, and heat plate.

Replaces Grand Hall factory part# P01708004A

Part Number: 90041
Dimension Front-to-Back: 14 5/8”
Dimension Side-to-Side: 3 7/8”
Material: stainless steel
Weight: 0.4

$40.30

$27.99

All Grand Hall Savor Plates

SS64-NG Igniter Components

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

$5.35

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Ignitor collector box with ceramic electrode and male round connector.

Wire not included. Commonly used with wire part# 03400.
Designed to connect to wires with round female connector.
If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Grand Hall factory part# P02609009M

Part Number: 02623
Material: ceramic
Weight: 0.2

$10.87

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Grand Hall factory part# P02502024C

Part Number: IGEIB4-B
Weight: 0.3

$31.52

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Grand Hall factory part# P02502024C

Part Number: 03340
Weight: 0.5

$31.50

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

All Grand Hall Igniter Components

SS64-NG Accessories

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

$15.59

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

$16.16

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$5.77

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2

$5.96

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.