GrillPro 266964

Stainless steel burner for GrillPro model 266964.

Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8

SIDE BURNER GPB for GrillPro model 266964.

Part Number: 390-C333
Weight: 1.0

Genuine OEM GrillPro cast iron cooking grid.

• Sold individually
• Number required varies, check your grill
• Porcelain enameled, glossy finish

Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11

Stainless steel Flav-R-Wave. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

HANDLESEAT LEFT GPB for GrillPro model 266964.

Part Number: 338-C310
Weight: 1.0

HANDLESEAT RIGHT GPB for GrillPro model 266964.

Part Number: 338-C311
Weight: 1.0

Genuine OEM GrillPro control knob..

• Off position D-Value: 6 or 12 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 8mm
• Knob shaft: none (flat)

Part Number: 472-C565
Weight: 0.1

CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 266964.

Part Number: 472-C502
Weight: 0.05

Control knob side/rear burner.

• Off position D-Value: 6 o'clock or 12:00 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 8mm (5/16”)
• Knob shaft/stem: None (flat)

Part Number: 472-C555
Weight: 0.05

Genuine OEM GrillPro warming rack for GrillPro model 266964.

Part Number: 225-C430
Weight: 2.4

Side burner valve for GrillPro model 266964.

Part Number: 440-C335
Weight: 1.0

Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

WIND SHIELD REAR BURNER GPB for GrillPro model 266964.

Part Number: 393-C441
Weight: 0.11

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Dimensions: 8” x 9 1/4”
Material: Paperback
Weight: 3.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Deluxe venturi brush with 11” coil spring flexible shaft

Part Number: 77310
Weight: 0.3