Home > GrillPro Grill Models > GrillPro 266974
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your GrillPro grill. This is best done with the old parts out of the grill. Verify your GrillPro grill model number.
Part diagrams and owners manuals for GrillPro model: 266974
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for the GrillPro 266974
266974 Burners
REAR BURNER ASSY GPB for GrillPro model 266974.
Part Number: 393-C500
Weight: 2.9
Image not available
$85.76
Stainless steel burner for GrillPro model 266974.
Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8
$35.18
SIDE BURNER GPB for GrillPro model 266974.
Part Number: 390-C333
Weight: 1.0
Image not available
$21.00
266974 Cooking Grids
Genuine OEM GrillPro cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11
$35.46
266974 FLAV-R-WAVE
Stainless steel Flav-R-Wave. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8
$29.85
266974 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
266974 Knobs and Handles
HANDLESEAT LEFT GPB for GrillPro model 266974.
Part Number: 338-C310
Weight: 1.0
Image not available
$16.39
HANDLESEAT RIGHT GPB for GrillPro model 266974.
Part Number: 338-C311
Weight: 1.0
Image not available
$16.39
Genuine OEM GrillPro control knob..
- Off position D-Value: 6 or 12 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm
- Knob shaft: none (flat)
Part Number: 472-C565
Weight: 0.1
$8.15
CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 266974.
Part Number: 472-C502
Weight: 0.05
$5.15
Control knob side/rear burner.
- Off position D-Value: 6 o'clock or 12:00 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm (5/16”)
- Knob shaft/stem: None (flat)
Part Number: 472-C555
Weight: 0.05
$6.09
266974 Warming Racks
Genuine OEM GrillPro warming rack for GrillPro model 266974.
Part Number: 225-C430
Weight: 2.4
$24.72
266974 Valves, Orifices, and Manifolds
Side burner valve for GrillPro model 266974.
Part Number: 440-C335
Weight: 1.0
Image not available
$18.47
266974 Heat indicators and Meat Thermometers
Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
266974 Miscellaneous Repair Parts
WIND SHIELD REAR BURNER GPB for GrillPro model 266974.
Part Number: 393-C441
Weight: 0.11
$7.97
266974 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90
$25.40
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73