Parts for GrillPro 268784

Home > GrillPro Grill Models > GrillPro 268784

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillPro grill.

Part diagrams and owners manuals for GrillPro model: 268784

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Exploded parts diagram for model: 268784

Replacement grill parts for GrillPro model: 268784

268784 Burners

REAR BURNER ASSY GPB for GrillPro model 268784.

Part Number: 393-C500
Weight: 2.9

Image not available

$85.76

Stainless steel burner for GrillPro model 268784.

Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8

$35.18

SIDE BURNER GPB for GrillPro model 268784.

Part Number: 390-C333
Weight: 1.0

Image not available

$21.00

All GrillPro Burners

268784 Cooking Grids

Genuine OEM GrillPro cast iron cooking grid.

Sold individually
Number required varies, check your grill
Porcelain enameled, glossy finish

Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11

$35.46

All GrillPro Cooking Grids

268784 FLAV-R-WAVE

Stainless steel Flav-R-Wave. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8

$29.85

All GrillPro FLAV-R-WAVE

268784 Igniter Components

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Universal battery powered push button ignitor.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

$31.96

All GrillPro Igniter Components

268784 Knobs and Handles

HANDLESEAT LEFT GPB for GrillPro model 268784.

Part Number: 338-C310
Weight: 1.0

Image not available

$16.39

HANDLESEAT RIGHT GPB for GrillPro model 268784.

Part Number: 338-C311
Weight: 1.0

Image not available

$16.39

Genuine OEM GrillPro control knob..

Off position D-Value: 6 or 12 o'clock
Knob diameter: 2 1/4”
Socket diameter: 8mm
Knob shaft: none (flat)

Part Number: 472-C565
Weight: 0.1

$8.15

CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 268784.

Part Number: 472-C502
Weight: 0.05

$5.15

Control knob side/rear burner.

Off position D-Value: 6 o'clock or 12:00 o'clock
Knob diameter: 2 1/4”
Socket diameter: 8mm (5/16”)
Knob shaft/stem: None (flat)

Part Number: 472-C555
Weight: 0.05

$6.09

All GrillPro Knobs and Handles

268784 Warming Racks

Genuine OEM GrillPro warming rack for GrillPro model 268784.

Part Number: 225-C430
Weight: 2.4

$24.72

All GrillPro Warming Racks

268784 Valves, Orifices, and Manifolds

CONTROL ASSEMBLY LP 5V GPB for GrillPro model 268784.

Part Number: 691-C450
Weight: 2.10

Image not available

$85.76

Side burner valve for GrillPro model 268784.

Part Number: 440-C335
Weight: 1.0

Image not available

$18.47

All GrillPro Valves, Orifices, and Manifolds

268784 Heat indicators and Meat Thermometers

Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

$17.76

All GrillPro Heat indicators and Meat Thermometers

268784 Miscellaneous Repair Parts

WIND SHIELD REAR BURNER GPB for GrillPro model 268784.

Part Number: 393-C441
Weight: 0.11

$7.97

All GrillPro Miscellaneous Repair Parts

268784 Accessories

Texas hickory flavor wood chips. 800g.

Part Number: 00220
Weight: 2.0

$6.87

Deluxe 17” stainless steel turner.

Soft comfort rubber grip
Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$5.77

Cast aluminum griddle

Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0

$27.83

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5

$17.59

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.