GrillPro 269747

REAR BURNER ASSY GPB for GrillPro model 269747.

Part Number: 393-C500
Weight: 2.9

Stainless steel burner for GrillPro model 269747.

Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8

SIDE BURNER GPB for GrillPro model 269747.

Part Number: 390-C333
Weight: 1.0

Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.

Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.

• 304 commercial grade stainless steel
• Large diameter 5/16” solid stainless rods
• Made in USA .
• Sold individually.

See part CLA-GS0004-X2 for a more economical 2-pack.

Part Number: CLA-GS0004
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 8.5

Genuine OEM GrillPro cast iron cooking grid.

• Sold individually
• Number required varies, check your grill
• Porcelain enameled, glossy finish

Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11

Genuine OEM GrillPro cast iron cooking grid.

• Sold individually
• Number required varies, check your grill
• Porcelain enameled, glossy finish

Part Number: 225-C620
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 1/2”
Material: cast iron
Weight: 6.9

Stainless steel Flav-R-Wave. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8

Universal battery powered push button ignitor.

• 1.5 volt
• Has five (5) terminals (male spade connector)
• Uses a single AA battery (not included))
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Overall dimensions: 2” x 3 3/8” x 3”
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

HANDLESEAT LEFT GPB for GrillPro model 269747.

Part Number: 338-C310
Weight: 1.0

HANDLESEAT RIGHT GPB for GrillPro model 269747.

Part Number: 338-C311
Weight: 1.0

LID HANDLE GPB for GrillPro model 269747.

Part Number: 338-C613
Weight: 1.0

Genuine OEM GrillPro control knob..

• Off position D-Value: 6 or 12 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 8mm
• Knob shaft: none (flat)

Part Number: 472-C565
Weight: 0.1

CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 269747.

Part Number: 472-C502
Weight: 0.05

Control knob side/rear burner.

• Off position D-Value: 6 o'clock or 12:00 o'clock
• Knob diameter: 2 1/4”
• Socket diameter: 8mm (5/16”)
• Knob shaft/stem: None (flat)

Part Number: 472-C555
Weight: 0.05

Side burner valve for GrillPro model 269747.

Part Number: 440-C335
Weight: 1.0

Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.

Part Number: 10571-6
Weight: 0.12

6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles

Part Number: 40538
Material: chrome steel
Weight: 1.1

15” Stainless steel tong.

• Soft comfort grip
• Locking mechanism

Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.

Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5

Abrasive scrubbing brush. Ideal for cleaning porcelain grills.

Part Number: 71448
Weight: 0.2