Home > GrillPro Grill Models > GrillPro 269784
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillPro grill.
Part diagrams and owners manuals for GrillPro model: 269784
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts to fit GrillPro model: 269784
269784 Burners
REAR BURNER ASSY GPB for GrillPro model 269784.
Part Number: 393-C500
Weight: 2.9
Image not available
$85.76
Stainless steel burner for GrillPro model 269784.
Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8
$35.18
SIDE BURNER GPB for GrillPro model 269784.
Part Number: 390-C333
Weight: 1.0
Image not available
$21.00
269784 Cooking Grids
Genuine OEM GrillPro cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 225-C620
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 1/2”
Material: cast iron
Weight: 6.9
$53.14
Genuine OEM GrillPro cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11
$35.46
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Made in USA .
- Sold individually.
See part CLA-GS0004-X2 for a more economical 2-pack.
Part Number: CLA-GS0004
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 8.5
$91.34
269784 FLAV-R-WAVE
Stainless steel Flav-R-Wave. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8
$29.85
269784 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
269784 Knobs and Handles
HANDLESEAT LEFT GPB for GrillPro model 269784.
Part Number: 338-C310
Weight: 1.0
Image not available
$16.39
HANDLESEAT RIGHT GPB for GrillPro model 269784.
Part Number: 338-C311
Weight: 1.0
Image not available
$16.39
LID HANDLE GPB for GrillPro model 269784.
Part Number: 338-C613
Weight: 1.0
Image not available
$15.02
Genuine OEM GrillPro control knob..
- Off position D-Value: 6 or 12 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm
- Knob shaft: none (flat)
Part Number: 472-C565
Weight: 0.1
$8.15
CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 269784.
Part Number: 472-C502
Weight: 0.05
$5.15
Control knob side/rear burner.
- Off position D-Value: 6 o'clock or 12:00 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm (5/16”)
- Knob shaft/stem: None (flat)
Part Number: 472-C555
Weight: 0.05
$6.09
269784 Valves, Orifices, and Manifolds
VALVE ASSY GPB for GrillPro model 269784.
Part Number: 691-C650
Weight: 1.0
Image not available
$114.23
Side burner valve for GrillPro model 269784.
Part Number: 440-C335
Weight: 1.0
Image not available
$18.47
269784 Heat indicators and Meat Thermometers
Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
269784 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Upright porcelain steel roasting rack with grid topper.
Part Number: 40935
Weight: 2.9
$31.80 $21.99
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31