Home > GrillPro Grill Models > GrillPro 269984
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your GrillPro grill.
Part diagrams and owners manuals for GrillPro model: 269984
Click small image to enlarge. Click Large image to reduce.
Double click for new window |
| |
Replacement grill parts for GrillPro model: 269984
269984 Burners
REAR BURNER ASSY GPB for GrillPro model 269984.
Part Number: 393-C500
Weight: 2.9
Image not available
$85.76
Stainless steel burner for GrillPro model 269984.
Part Number: 11061
Dimensions: 18 1/4” x 1 1/4”
Material: stainless steel
Weight: 0.8
$35.18
SIDE BURNER GPB for GrillPro model 269984.
Part Number: 390-C333
Weight: 1.0
Image not available
$21.00
269984 Cooking Grids
Genuine OEM GrillPro cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 225-C620
Dimension Front-to-Back: 19 1/8”
Dimension Side-to-Side: 12 1/2”
Material: cast iron
Weight: 6.9
$53.14
Genuine OEM GrillPro cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain enameled, glossy finish
Part Number: 225-C320
Dimension Front-to-Back: 19”
Dimension Side-to-Side: 8 3/8”
Material: cast iron
Weight: 4.11
$35.46
Premium quality heavy duty stainless steel cooking grid. Our USA-made premium stainless grids are simply the best obtainable. We have them manufactured here in the USA to our specifications and standards, which are high. Of course, they're not available anywhere else.
Unlike the standard issue stainless grids generally found today, which are typically low grade stainless and sometimes hollow, or coated carbon steel, our premium grids are made from solid high quality stainless steel rods. If you're looking for the best, you've found it. Just look at the weight of one of these grids, over 8 pounds of solid stainless each.
- 304 commercial grade stainless steel
- Large diameter 5/16” solid stainless rods
- Made in USA
. - Sold individually.
See part CLA-GS0004-X2 for a more economical 2-pack.
Part Number: CLA-GS0004
Dimension Front-to-Back: 19 1/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 8.5
$91.34
269984 FLAV-R-WAVE
Stainless steel Flav-R-Wave. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0089
Dimension Front-to-Back: 17”
Dimension Side-to-Side: 5 1/4”
Material: stainless steel
Weight: 0.8
$29.85
269984 Igniter Components
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
269984 Knobs and Handles
HANDLESEAT LEFT GPB for GrillPro model 269984.
Part Number: 338-C310
Weight: 1.0
Image not available
$16.39
HANDLESEAT RIGHT GPB for GrillPro model 269984.
Part Number: 338-C311
Weight: 1.0
Image not available
$16.39
LID HANDLE GPB for GrillPro model 269984.
Part Number: 338-C613
Weight: 1.0
Image not available
$15.02
Genuine OEM GrillPro control knob..
- Off position D-Value: 6 or 12 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm
- Knob shaft: none (flat)
Part Number: 472-C565
Weight: 0.1
$8.15
CONTROL KNOB SB/RB BEZEL GPB (same as control knob bezel # 472-C500) for GrillPro model 269984.
Part Number: 472-C502
Weight: 0.05
$5.15
Control knob side/rear burner.
- Off position D-Value: 6 o'clock or 12:00 o'clock
- Knob diameter: 2 1/4”
- Socket diameter: 8mm (5/16”)
- Knob shaft/stem: None (flat)
Part Number: 472-C555
Weight: 0.05
$6.09
269984 Valves, Orifices, and Manifolds
VALVE ASSY GPB for GrillPro model 269984.
Part Number: 691-C650
Weight: 1.0
Image not available
$114.23
Side burner valve for GrillPro model 269984.
Part Number: 440-C335
Weight: 1.0
Image not available
$18.47
269984 Heat indicators and Meat Thermometers
Genuine OEM GrillPro Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
269984 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Replacement heads for grill brush 77600. Set of two.
Part Number: 77650
Weight: 0.3
$6.73
USA shipping (contiguous 48 states only)