Home > Huntington Grill Models > Huntington 365354
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement grill parts for Huntington model: 365354
365354 Burners
Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
365354 Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75
Image not available
$43.13
365354 FLAV-R-WAVE
Genuine OEM Huntington stainless steel Flav-R-Wave for Huntington model 365354.
Part Number: 52209-404
Dimension Front-to-Back: 15 7/8”
Dimension Side-to-Side: 6”
Material: stainless steel
Weight: 1.14
$21.93
365354 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Huntington electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
365354 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
GREASE PAN - 330/440/550 for Huntington model 365354.
Part Number: 52009-901
Dimensions: 5 1/8” x 6 1/2”
Weight: .40
$15.11
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 365354.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
365354 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 365354.
Part Number: 10472-K431
Weight: 0.1
$5.15
365354 Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 2 3/8” wide and 2” high. The threaded stem is about 5 /16” diameter and 1 1/8” long.
Part Number: 10571-6
Weight: 0.12
$17.76
365354 Miscellaneous Repair Parts
Washer for Huntington model 365354.
Part Number: S21255
Weight: 0.01
$1.08
Hinge pin clip for Huntington model 365354.
Part Number: S21233
Weight: 0.01
$1.08
365354 Hardware
LID BUMPER for Huntington model 365354.
Part Number: Y-11231
Weight: 0.01
$1.08
365354 Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Deluxe non-stick flat spit basket. Attaches to 3/8” rotisserie rod with adjustable lid to secure food. 16”x7.5”x2”
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Dimensions: 7 1/2” x 16”
Weight: 1.5
$22.60
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31