Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Huntington Igniter Components
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole for some Huntington grills. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.77
|
|
Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Huntington grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03197
Weight: 0.05
$4.65
Universal 2 5/8” adapter wire with female round and male
spade connectors for some Huntington grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory
piezo spark generators have male
round connectors, while battery operated electronic spark generators usually have male
spade connectors.
- Can change male round to male spade
- Can change female spade to female round
ALL
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03198
Weight: 0.05
$5.35
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Huntington grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
Universal battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has one (1) terminal (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03310
Weight: 0.3
$16.95
Universal volt battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03320
Weight: 0.3
$27.78
Universal battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03330
Weight: 0.5
$18.48
Universal three-outlet battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has three (3) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5
$33.89
Universal battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has (5) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3
$19.43
Universal four-outlet battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03340
Weight: 0.5
$31.50
Universal battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Universal battery powered push button ignitor for some Huntington grills.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
Ignition connection wire used to connect battery powered spark generators to electrodes for some Huntington grills. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
|
|
14” ground wire with female
spade connector and eye connectors for some Huntington grills. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
|
|
20” Ignitor adapter wire with female
spade connector and male
round connector for some Huntington grills. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Dimensions: 1/16
Weight: 0.05
$5.77
|
|
Universal adapter wire with male round and female
spade connectors for some Huntington grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
$3.84
Collector box and electrode assembly for some Huntington grills. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
$10.35
|
|
Push button igniter for some Huntington grills. For single wire for grills with no side burner. Wires not included. Comes in black or grey as available from manufacturer.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-21
Weight: 0.05
$6.37
|
|
Genuine OEM Huntington push button igniter for some Huntington grills. For two-wire grills with second wire for side burner. Wires not included.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-22
Weight: 0.2
$8.19
|
|
Electronic push-button 1-spade igniter for some Huntington grills.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
- Also replaces part 10342-248
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-244
Weight: 0.3
$16.95
|
|
Genuine OEM Huntington electronic push-button 2-spade igniter for some Huntington grills.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
|
|
Genuine OEM Huntington electronic push-button 3-spade igniter for some Huntington grills.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-246
Weight: 0.6
$18.48
|
|
Genuine OEM Huntington electronic push-button 4-spade igniter for some Huntington grills.
- Uses AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-247
Weight: 0.5
$18.48
|
|
Genuine OEM Huntington push-button electronic ignitor for some Huntington grills.
- 5 spark outlets (spade connectors)
- Uses AAA battery (not included)
- Requires 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-251
Weight: 0.5
$19.43
|
|
Genuine OEM Huntington electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors for some Huntington grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
|
|
Genuine OEM Huntington collector box, complete for some Huntington grills. Replaces parts 10342-E400 and 10342-E401, which have been discontinued as separate parts.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E400A
Dimensions: 20 1/2
Weight: 0.75
$19.67
|
|
Genuine OEM Huntington 28” wire for side burner for some Huntington grills. One female
spade connector, one female
round connector..
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T16
Dimensions: 28
Weight: 0.05
$4.50
|
|
Genuine OEM Huntington electrode with 49” wire that has a female round end for rear burner for some Huntington grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T17
Weight: 0.13
$12.67
Genuine OEM Huntington 32” wire for side burner and other applications for some Huntington grills. Both ends are female
spade connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T18
Dimensions: 32
Weight: 0.05
$4.42
|
|
For front top and bottom collector box; new design by manufacturer, a single piece replacing a combo set top & bottom for some Huntington grills. Fits 5-burner grills. Replaces OEM number 22226-014A and also numbers 22226-014 and 22216-014.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 22026-903
Dimensions: 28
Weight: 1.6
$33.73
|
|
Genuine OEM Huntington front collector box, top & bottom combo for some Huntington grills. Includes top 22215-014 and bottom 22225-014. This part has been redesigned by the manufacturer and is now a little shorter but still fully functional in the original grills. Fits 4-Burner grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 22225-014A
Dimensions: 21 5/8
Material: stainless steel
Weight: 1.2
$28.89
|
|
COLLECTOR BOX ASSY 330 430SS
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Huntington grills.
Part Number: 52224-024A
Weight: 0.2
Image not available
$14.06
|
|
Genuine stainless steel two piece collector box assembly for some Huntington grills. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
|
|
COLLECTOR BOX ASSEMBLY 625
For more information about ignition systems and components, please see article Ignition 101 in our help center for some Huntington grills.
Part Number: 52226-014A
Weight: 1.0
Image not available
$12.82
|
|
Universal collector box with electrode and wire for some Huntington grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
$13.71
46” Wire with female
spade connectors and square plastic connectors for some Huntington grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
|
|
Battery powered push button igniter for some Huntington grills.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IGEIB2-B
Weight: 0.3
$31.52
|
|
Genuine OEM Huntington collector box and electrode assembly for some Huntington grills. Includes
- burner mounted collector box (clip on)
- ceramic electrode and 18” wire with round connector and protective sleeve.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15500
Weight: 0.1
$5.45
|
|
Genuine OEM Huntington electrode for some Huntington grills.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: S15504
Weight: 0.2
$3.81
|
|
Genuine OEM Huntington snap-on electrode, wire, and collector box assembly for some Huntington grills.
Note: This part does not fit our after-market burners such as 19002.
This part only fits OEM burners. OEM burner part numbers usually start with letters SM and SP).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: SP5016-20
Weight: 0.05
$8.40
|
|
Push-button electronic igniter with two (2)
spade connectors for some Huntington grills. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
|
|
Push-button electronic igniter with three (3)
spade connectors for some Huntington grills. Comes with sliver or black cap per availability. Needs (1) AA battery (not included); requires 7/8” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3007
Weight: 0.2
$37.10 $14.99 |
|
Push-button electronic igniter with three (3)
spade connectors for some Huntington grills. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG3008
Weight: 0.2
$18.48
|
|
Universal 3 outlet rotary spark generator for some Huntington grills. Includes knob.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-8B
Weight: 0.3
$21.96
Snap In
Piezo Ignitor for some Huntington grills. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
|
|