Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Huntington Knobs and Handles
Universal control knob with with long 1” shaft for some Huntington grills. Counter-clockwise bezel.
- The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
- Off position D-Value: Selectable (12, 3, 6, or 9 o'clock)
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: 1 inch
Part Number: 00110
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1
$6.58
Universal control knob for some Huntington grills. Counter-clockwise bezel.
- The adhesive-backed knob face can be attached to the knob in any position, which allows the knob to have OFF at the top, bottom, or wherever necessary. Simply stick the knob face in the position reguired for your grill
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: 1/2”
Part Number: 00310
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.1
$6.58
Universal 24” hardwood front lid handle for some Huntington grills. Designed to bolt through existing lid holes, if present. Sliding mounting hardware can adjust to holes up to 23” apart.
Part Number: 01200
Dimensions: 24
Material: Wood
Weight: 0.8
$18.64
Black control knob for Fire Magic Custom, Regal, and Gourmet grills for some Huntington grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 2”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01700
Dimensions: 2” x 2”
Material: plastic
Weight: 0.1
$10.87
|
|
Universal black control knob for some Huntington grills. Counter-clockwise bezel.
- Off position D-Value: Selectable
- Knob diameter: 2 1/16”
- Socket diameter: 8mm
- Knob shaft: None
Part Number: 01800
Dimensions: 2 1/16” x 2 1/16”
Material: plastic
Weight: 0.05
$6.26
Universal 2 5/16” knob for some Huntington grills.
- Selectable D-Value
- Selectable socket diameter - 6mm or 8mm.
- Selectable shaft length - flush, 1/4”, or 1 5/8”. Shafts can also be trimmed to desired length.
- Includes 6 shaft inserts and set screw.
- Fits any grill with inside bezel diameter greater than 2 5/16” (the knob diameter).
Part Number: 02342
Dimensions: 2 5/16” x 2 5/16”
Material: plastic
Weight: 0.20
$16.93
Stainless steel lid handle with rubber holding area that replaces resin lid handle 30230230; includes mounting brackets and two screws for some Huntington grills.
Part Number: 10070-E13A
Weight: .85
$27.92
|
|
Handle heat shield installs onto the body of the grill before installing the handle for some Huntington grills. (Used with handle 24005-12AB when replacing handle 10184-70).
Part Number: 10184-E124
Weight: 1.0
Image not available
$18.95
CONTROL KNOB - BEZEL BLK for some Huntington grills.
Part Number: 10472-E38
Weight: 0.1
Image not available
$5.15
|
|
CONTROL KNOB SMALL W/BA STRIP for some Huntington grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 10472-K231
Weight: 0.1
$5.15
|
|
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for some Huntington grills.
Part Number: 10472-K431
Weight: 0.1
$5.15
|
|
DOOR HANDLE RESIN * for some Huntington grills.
Part Number: 21475-138
Weight: 1.0
$6.73
|
|
Genuine OEM Huntington small control knob for some Huntington grills.
- Off position D-Value: 6 o'clock
- Knob diameter: 1 7/8”
- Socket diameter: 5/16”
- Knob shaft: 1/2”
Part Number: 22001-668
Weight: 0.1
$12.32
|
|
LID-HANDLE BENT 500 430 SS for some Huntington grills. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
|
|
Lid handle bent 500 assembly for some Huntington grills. Mounting holes center to center about 23 5/8”. (Used with handle heat shield 10184-E124 when replacing handle 10184-E70.)
Part Number: 24005-12AB
Dimensions: 25 1/2
Weight: 1.10
Image not available
$28.06
|
|
Universal hardwood lid handle for some Huntington grills.
Part Number: 25950
Material: wood
Weight: 0.3
$15.73
Universal control knobs, set of two knobs, includes eight (8) shaft inserts to accomodate valve stem diameters of approximately 5/6” and 1/4” for some Huntington grills.
- Off position D-Value: 12 or 6 or 3 or 9 o'clock
- Knob diameter: 2 3/16”
- Insert socket diameters: 8.25mm (.32”) and 6.10mm (.24”)
- Knob shaft: Flat or 1”
Part Number: 25960
Weight: 0.20
$16.69
LID HANDLE RESIN W/REGAL STRAP for some Huntington grills.
Part Number: 26003-34A
Weight: 1.0
Image not available
$11.60
|
|
HANDLE INSERT-REGAL 440/500 * for some Huntington grills.
Part Number: 26005-305
Weight: 1.0
Image not available
$4.86
HANDLE INSERT - REGAL 625 for some Huntington grills.
Part Number: 26006-305
Weight: 1.0
Image not available
$6.96
|
|
LID HANDLE RESIN - 30% NYLON for some Huntington grills.
Part Number: 26006-34
Weight: 1.0
Image not available
$24.92
|
|
Black lid handle for some Huntington grills. Fits older GrillPro and other models which use a half-handle that is 10 3/4” long. Requires 8 3/4” mounting holes, center to center.
Part Number: 30230228
Weight: 0.45
$14.88
|
|
KNOB GAS VALVE SMALL for some Huntington grills.
Part Number: 50479-168
Weight: 0.1
$5.15
|
|
Universal stainless steel lid handle for some Huntington grills. Adjusts from 21” hole centers, down to 10”. Includes mounting hardware. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-MS0055
Dimensions: 23 5/8
Material: stainless steel
Weight: 1.0
$45.35
Universal durable black phenolic lid handle with threaded brass insert for some Huntington grills. (1/4” x 20 thread). Includes mounting bolt and lockwasher. Made for Ducane but makes a great universal lid handle that can be used on almost any grill.
Part Number: PH-2B
Dimensions: 3 1/2
Material: 6.59
Weight: .3
$8.12
KNOB VALVE LARGE for some Huntington grills.
Part Number: SP11-7
Weight: 0.1
Image not available
$5.15
Phenolic standoff spacer (1 1/2” x 1 1/8”) used between lid handle and the grill's lid for some Huntington grills.
Part Number: SP5001-40
Weight: .03
Image not available
$2.89
|
|