Home > Huntington Grill Models > Huntington 682254B
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement gas grill parts for Huntington model: 682254B
682254B Burners
Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
682254B Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8
Dimension Side-to-Side: 12 3/4
Material: cast iron
Weight: 6.75
Image not available
$43.13
682254B Heat Tents
Heat tent 'C' stainless steel; also known as a Flav-r-Wave or
heat plate for Huntington model 682254B.
Part Number: 52249-404
Material: stainless steel
Weight: 1.0
Image not available
$11.73
682254B Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Huntington electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4 mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
Genuine OEM Huntington electrode with 14 3/8 connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
682254B Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2 x 6
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Huntington model 682254B.
Part Number: 57055-901
Dimensions: 6 3/4 x 25 7/16
Material: porcelain steel
Weight: 1.25
$27.24
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 682254B.
Part Number: 22009-901
Dimensions: 6 1/2 x 5 1/8
Weight: .45
$15.11
682254B Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2 apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 682254B.
Part Number: 10472-K431
Weight: 0.1
$5.15
682254B Regulators and Hoses
24 LP hose and regulator with
QCC-1 connection.
- For use on new style QCC-1 tanks.
- Consists of hose part# 01000 and regulator part# 00920.
- Hose end with SAE 3/8 female flare fitting connects to grill.
Note: The grill must have a matching SAE 3/8 male flare (standard on most grills), measure to be sure. Due to the SAE standard, the actual dimension of the male SAE 3/8 fitting is much larger, approximately 5/8. See our
flare fitting description for information on measuring and sizes.
Part Number: 80012
Dimensions: 23 1/2 x 0 1/2
Weight: 0.80
$28.54
682254B Wheels and Castors
Wheel 6 plastic with 3/8 axle hole for Huntington model 682254B.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25 long; uses one hinge pin part number S21233 not included for Huntington model 682254B.
Part Number: 10240-13
Weight: .10
$2.23
682254B Warming Racks
WARMING RACK 440 BLK PORC for Huntington model 682254B.
Part Number: 52005-091
Material: porcelain steel
Weight: 1.0
Image not available
$22.32
682254B Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 1 7/8 wide and 1 7/16 high. The threaded stem is about 5/16 diameter and 1 1/8 long.
Part Number: 10571-5
Dimensions: 1 7/8 x 1 7/16
Weight: 0.1
$15.11
682254B Miscellaneous Repair Parts
Hinge pin clip for Huntington model 682254B.
Part Number: S21233
Weight: 0.01
$1.08
682254B Hardware
LID BUMPER for Huntington model 682254B.
Part Number: Y-11231
Weight: 0.01
$1.08
682254B Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10 x 13 3/4.
Part Number: 41338
Weight: 1.1
$22.60
Deluxe 17 stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9 x 13
Weight: 0.4
$8.64
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60