Home > Huntington Grill Models > Huntington 682257
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Huntington grill.
Replacement grill parts for the Huntington 682257
682257 Burners
Genuine OEM Huntington stainless steel burner replaces original part number 52904-144 (52904-144LP and 52904-144NG). For LP grills, adjust air shutter to about 1/3 opened and for NG adjust about 2/3 open or more as needed.
Part Number: 52924-144
Dimensions: 15 3/4
Material: stainless steel
Weight: 0.8
$20.15
682257 Cooking Grids
COOKING GRID CAST IRON 330/440/550 (Sold individually; number required varies, check your grill.)
Part Number: 52002-181
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 12 3/4”
Material: cast iron
Weight: 6.75
Image not available
$43.13
682257 Heat Tents
Heat tent 'C' stainless steel; also known as a Flav-r-Wave or
heat plate for Huntington model 682257.
Part Number: 52249-404
Material: stainless steel
Weight: 1.0
Image not available
$11.73
682257 Igniter Components
Genuine stainless steel two piece collector box assembly. Consists of both upper and lower pieces.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 52225-014A
Dimensions: 23
Material: stainless steel
Weight: 1.0
$28.25
Genuine OEM Huntington electronic push-button 2-spade igniter.
- Uses AAA battery (not included)
- .Requires 3/4” mounting hole
- Also replaces part# 10342-242 and 10342-249
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-245
Weight: 0.3
$16.46
Genuine OEM Huntington electrode with 14 3/8” connector wire that has a spade female end; use with AA or AAA battery powered ignitors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-E13
Weight: 0.05
$3.81
682257 Grease Trays
Small grease shield used in-between each burner. Four of these replaces one grease shield # 27245-904. Four of these also replaces one grease shield # 22245-901and five of these replaces one grease shield # 27246-904. Refer to your model number and owner's manual. SOLD INDIVIDUALLY
Part Number: 27249-904
Dimensions: 6 1/2” x 6”
Material: stainless steel
Weight: .35
$7.60
Grease tray 440; porcelain flatte matte finish for Huntington model 682257.
Part Number: 57055-901
Dimensions: 6 3/4” x 25 7/16”
Material: porcelain steel
Weight: 1.25
$27.24
Genuine OEM Huntington Porcelain Grease Pan for Huntington model 682257.
Part Number: 22009-901
Dimensions: 6 1/2” x 5 1/8”
Weight: .45
$15.11
682257 Knobs and Handles
LID-HANDLE BENT 500 430 SS. NOTE: The mounting holes, center to center, are 23 1/2” apart.
Part Number: 24005-12A
Dimensions: 25
Weight: .85
$25.86
CONTROL KNOB RESIN LRG BLACK -- W/SS BA STRIP for Huntington model 682257.
Part Number: 10472-K431
Weight: 0.1
$5.15
682257 Regulators and Hoses
Genuine OEM Huntington NG gas hose for Huntington model 682257.
Part Number: 10111-K45
Weight: 2.1
$88.64
682257 Wheels and Castors
Wheel 6” plastic with 3/8” axle hole for Huntington model 682257.
Part Number: 10892-608
Weight: 0.2
$7.28
Wheel bolt 3.25” long; uses one hinge pin part number S21233 not included for Huntington model 682257.
Part Number: 10240-13
Weight: .10
$2.23
682257 Warming Racks
WARMING RACK 440 BLK PORC for Huntington model 682257.
Part Number: 52005-091
Material: porcelain steel
Weight: 1.0
Image not available
$22.32
682257 Heat indicators and Meat Thermometers
Genuine OEM Huntington Heat indicator. About 1 7/8” wide and 1 7/16” high. The threaded stem is about 5/16” diameter and 1 1/8” long.
Part Number: 10571-5
Dimensions: 1 7/8” x 1 7/16”
Weight: 0.1
$15.11
682257 Miscellaneous Repair Parts
Hinge pin clip for Huntington model 682257.
Part Number: S21233
Weight: 0.01
$1.08
682257 Hardware
LID BUMPER for Huntington model 682257.
Part Number: Y-11231
Weight: 0.01
$1.08
682257 Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57