Home > Kenmore Grill Models > Kenmore 119.162310Kenmore 4-Burner LP Gas Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 119.162310
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
Replacement grill parts for Kenmore model: 119.162310
119.162310 Burners
Stainless steel tube burner.
Includes:
WARNING: Measure your existing burners before purchasing replacements to determine the length you need. For reasons unknown to us, some versions of this grill model (GR2150901-MM-00) use the 15 3/8” 16231 burner, while others use the 17 1/2” 16261 burner. Measure and order accordingly.
Replaces Kenmore factory part# SD0012-1
Part Number: 16231
Dimensions: 15 3/8” x 1”
Material: stainless steel
Weight: 0.50
$34.77
119.162310 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 59501
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 6 1/16”
Material: porcelain steel wire
Weight: 2.6
$38.84
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of three (3).
Part Number: 63113
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 24 3/4”
Material: gloss cast iron
Weight: 15.12
$104.92
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model.
Part Number: CG-71P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.55
$33.23
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model.
Part Number: CG-72P-CI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45
$51.52
Stainless steel
cooking grid. Like the originals these replace, these grids are made of hollow stainless tubes.
Part Number: 56S43
Dimension Front-to-Back: 18 5/8”
Dimension Side-to-Side: 26 1/2”
Material: stainless steel tubes
Weight: 8.0
$130.14
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 60193-UNI-X3 for a set of three (3).
Part Number: 60193-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 9 1/2”
Material: cast iron
Weight: 6.45
$51.52
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 65131-UNI
Dimension Front-to-Back: 18 3/4”
Dimension Side-to-Side: 7 5/8”
Material: cast iron
Weight: 5.55
$33.23
119.162310 Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Replaces Kenmore factory part# SA0376
Part Number: 91521
Dimension Front-to-Back: 16 1/4”
Dimension Side-to-Side: 4 1/8”
Material: porcelain steel
Weight: 1.0
$23.44
119.162310 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Burner mounted electrode with male spade connector. Includes small mounting bolt and nut.
- Wire not included. Commonly used with wire part# 03610.
- Female spade connector on wire connects to male spade connector of electrode.
- If used with existing wire, confirm connecting end of wire is a female spade connector
- Usually, one electrode required per burner
NOTE: Electrodes provide the spark that ignites the gas when the ignitor button is depressed, or the knob is turned. They're the spark plug of the grill. ==> For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Also available in more economical 2, 3, 4, and 5 piece multi-packs. See part 04022-X2, X3, X4, and X5.
Replaces Kenmore factory part# SE9009
Part Number: 04022
Material: ceramic
Weight: 0.1
$6.81
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# SE0010
Part Number: IGEIB4-B
Weight: 0.3
$31.52
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# SE0010
Part Number: 03340
Weight: 0.5
$31.50
Universal battery powered push button ignitor.
- 1.5 volt
- Has five (5) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# SE0078
Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7
$38.00
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
$18.48
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
119.162310 Heat indicators and Meat Thermometers
Round 2 3/8” diameter heat indicator, includes one wing nut and one locking nut.
- Requires minimum 3/8” mounting hole
- Single 1 3/8” probe
- Threaded portion of probe stops at 1/2” from base
- See photo for details
Replaces Kenmore factory part# SE0076
Part Number: 00012
Dimensions: 2 3/8” x 2 3/8”
Weight: 0.1
$15.16
119.162310 Accessories
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
$14.27
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Abrasive scrubbing brush. Ideal for cleaning porcelain grills.
Part Number: 71448
Weight: 0.2
$5.96