Valves, Orifices, and Manifolds for Kenmore grills

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.

Kenmore Valves, Orifices, and Manifolds

Neoprene valve gasket for clamp-on gas control valves for some Kenmore grills. 19mm.

Part Number: 00019
Material: neoprene
Weight: 0.01
Dimensions: 0 1/2” x 0 1/4”

$5.24



Part# 00019 fits these 116 Kenmore models:




Brass orifice for some Kenmore grills. 6mm x 3/4” cone shaped orifice with #64 drill size starter hole. For Electec and other clamp-on valves. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31400
Material: brass
Weight: 0.01
Dimensions: 0 3/4” x 0 5/16”

$8.04



Part# 31400 fits these 115 Kenmore models:




Brass spud orifice with 5/16” x 32 thread size for some Kenmore grills. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31600
Material: brass
Weight: 0.01
Dimensions: 0 3/8” x 0 7/16”

$7.54



Part# 31600 fits these 134 Kenmore models:




Brass long blunt-end hood orifice drilled to #64 starter hole for some Kenmore grills. Fits valve 3042C, others. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 31800
Material: brass
Weight: 0.1
Dimensions: 1 5/16” x 0 9/16”

$9.87



Part# 31800 fits these 5 Kenmore models:




Brass spud orifice with 11/32” x 32 thread size for some Kenmore grills. Has #70 starter hole. Must be drilled to proper drill size.

If you would like us to drill the orifice(s) for you, there is a single $15 fee for this service, which will be added to the order when processed. Please tell us the number of burners in your grill and the total BTUs of your grill (less side burner and rotisserie burner, if any). BTU rating information can usually be found on the grill's CSA certification tag, located somewhere on the grill. Please furnish this, along with any other information you deem relevant, in the Message to CLA box during checkout.

Part Number: 33200
Material: brass
Weight: 0.01
Dimensions: 0 7/16” x 0 7/16”

$9.95



Part# 33200 fits these 2 Kenmore models:




Clamp-on brass gas valve with straight outlet for some Kenmore grills. Includes orifice.
  • D-Value: 12 o'clock
  • Stem diameter: 6mm
  • Stem length: 1 3/4”
Includes orifice with #72 starter hole. Must be drilled to proper drill size.

Part Number: 3700C
Material: brass
Weight: 0.5
Dimensions: 4 15/16” x 2 1/8”

$38.84



Part# 3700C fits these 115 Kenmore models:




Right valve of assembly 37000 for some Kenmore grills. Replaces right side of Sunbeam OEM part #3512-0100. Orifice not included. Use original or 11/32” x 32 replacement. Also fits pre-1995 Fiesta models. D-Value is 6 o'clock

Part Number: 37400
Material: brass
Weight: 0.3
 

$26.66



Part# 37400 fits these 2 Kenmore models:




3” valve shaft extender for some Kenmore grills.

Part Number: 38000
Material: brass
Weight: 0.1
Dimensions: 3 1/16” x 0 1/2”

$11.25



Part# 38000 fits these 3 Kenmore models:




Valve with 45° angled orifice snout built to accept 11/32 x 32 threaded spud type orifice (not provided); uses orifice # 33200 for some Kenmore grills. Mounts to the right side of original up-front control manifold assembly. Valve stem is 8mm, and needs a knob with a 9 D-value. Can use with universal knobs 00110 or 00310 or 01800 depending on needed knob stem length.

Part Number: 38600
Material: brass
Weight: 0.4
Dimensions: 3 9/16” x 1 1/4”

$27.67






45° angled valve with extra long orifice snout for some Kenmore grills. Accepts 11/32” x 32 threaded spud orifice (not included, see part# 33200). Mounts to left side of T manifold 38400. (39000 mounts to right side). Assembly MCM 32354 replaces Sunbeam OEM #40-2354.

Part Number: 38900
Material: brass
Weight: 0.3
 

$20.33



Part# 38900 fits these 2 Kenmore models:




VALVE BRACKET S/B (LONG) for some Kenmore grills.

Part Number: SP5007-6
Weight: 1.0
Image not available

$1.08



Part# SP5007-6 fits these 3 Kenmore models:




HVR DL SDBRN 48K BTU W/ S/B for some Kenmore grills.

Part Number: SP5027-4
Weight: 1.0
Image not available

$74.80



Part# SP5027-4 fits these 1 Kenmore models:




HVR 3B 39BTU KEN 8SB AUTO for some Kenmore grills.

Part Number: SP5030-4
Weight: 1.0
Image not available

$61.15



Part# SP5030-4 fits these 1 Kenmore models:




Dual brass LP valve assembly. Includes left and right control valves and valve manifold. Fits Arkla up-front control grills and others requiring 45 degree angle valves.
  • For use with LP gas
  • Includes two orifices drilled to #57 drill size
  • Includes pre-assembled 45 degree angle fitting, not shown in photo

Made in USA

Part Number: VLV-28
Material: brass
Weight: 1.1

$58.00



Part# VLV-28 fits these 134 Kenmore models:


We can ship parts for Kenmore gas BBQ grills worldwide



Back to Kenmore grill parts


GRILLING  ACCESSORIES

Replacement parts orders for Kenmore grills $79 and over shipped to the USA (contiguous 48 states only) FREE

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy