Kenmore 122.16431010 | Parts

Home > Kenmore Grill Models > Kenmore 122.16431010

We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.

Replacement gas grill parts for Kenmore model: 122.16431010

122.16431010 Burners

Stainless steel burner for Kenmore model 122.16431010.

Replaces Kenmore factory part# 10000652A0

Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9

stainless steel burner for Kenmore model 122.16431010

$34.77

All Kenmore Burners

122.16431010 Cooking Grids

Porcelain steel cooking grid. Porcelain enameled, glossy finish. Sold individually.

Replaces Kenmore factory part# 13000506A0

Part Number: 51641
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 17 7/16”
Material: porcelain steel wire
Weight: 4.9

$42.27

All Kenmore Cooking Grids

122.16431010 Flame Tamers

Stainless steel Flame Tamer for Kenmore model 122.16431010.

Replaces Kenmore factory part# 04005509A0

Part Number: NGKHP3
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.0

$19.61

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153-X4
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 3.2

$69.00

Stainless steel heat plate/Flame Tamer. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 0.8

$27.86

All Kenmore Flame Tamers

122.16431010 Igniter Components

Battery powered push button igniter.

Has four (4) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

$31.52

Universal four-outlet battery powered push button ignitor.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Burner mounted replacement electrode for use with burner 15641.

Ceramic insulator
Wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03351
Material: ceramic
Weight: 0.2

$12.38

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

$18.48

46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-30B
Dimensions: 46
Weight: 0.1

$7.10

All Kenmore Igniter Components

122.16431010 Heat indicators and Meat Thermometers

Oval lid heat indicator. Three-hole mount with two threaded studs 1 1/2” offset on center. Requires 3/8” center hole for temperature sensor probe.

Replaces Kenmore factory part# 05000572A0

Part Number: 22551
Dimensions: 2 15/16” x 1 7/8”
Weight: 0.2

$14.41

All Kenmore Heat indicators and Meat Thermometers

122.16431010 Accessories

Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.

Part Number: 00150
Dimensions: 5 1/4” x 8 3/8”
Material: cast iron
Weight: 3.90

$25.40

Deluxe 17” stainless steel turner.

Soft comfort rubber grip
Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

$8.76

Aluminum foil grilling trays. Package of three.

Heavy duty aluminum foil
Re-usable
Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

$8.64

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3

$6.73

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Date built: Monday, May 20 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.