Home > Kenmore Grill Models > Kenmore 141.16673
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 141.16673
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement grill parts for Kenmore model: 141.16673
141.16673 Burners
Stainless steel tube burner. Includes
Replaces Kenmore factory part# P02008029A
Part Number: 11631
Material: stainless steel
Weight: 0.8
Dimensions: 15 1/8 x 1
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
141.16673 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Kenmore factory part# P01604004B
Part Number: 51631
Material: porcelain steel wire
Weight: 4.0
Dimensions:
- Front-To-Back: 19″
- Side-To_Side: 6 5/16″
Aftermarket reversible heavy cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
- Pointed side is designed for perfect sear marks
- Grooved side captures juices for continous basting
Fits: Broil King 500/625/750 series grills.
NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.
Part Number: 22005-281-R
Material: Cast iron
Weight: 5.0
Dimensions:
- Front-To-Back: 19 1/4″
- Side-To_Side: 6 1/16″
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.
Part Number: 67845-1PC
Material: matte cast iron
Weight: 5.5
Dimensions:
- Front-To-Back: 19 3/16″
- Side-To_Side: 6 1/16″
Cast iron
cooking grids,
porcelain treated, flat matte finish for Kenmore model 141.16673.
Part Number: 67845
Material: matte cast iron
Weight: 27.2
Dimensions:
- Front-To-Back: 19 3/16″
- Side-To_Side: 30 5/16″
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually.
Part Number: 69501
Material: cast iron
Weight: 4.85
Dimensions:
- Front-To-Back: 19″
- Side-To_Side: 6 1/8″
141.16673 Heat Plates
Stainless steel
heat plate/ Flame Tamer for Kenmore model 141.16673.
Replaces Kenmore factory part# P01708009B
Part Number: KENHP4
Material: stainless steel
Weight: 0.5
Dimensions:
- Front-To-Back: 15 1/16″
- Side-To_Side: 4″
Stainless steel
heat plate/Flame Tamer. Made in USA

.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0130
Material: stainless steel
Weight: 0.60
Dimensions:
- Front-To-Back: 15 1/16″
- Side-To_Side: 4″
$24.95
$15.48
141.16673 Igniter Components
Ignitor collector box with ceramic electrode and male
round connector.
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
See part 02623-X4 for a more econimical 4 pack.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02621001K
Part Number: 02623
Material: ceramic
Weight: 0.2
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502184C
Part Number: IGEIB4-B
Weight: 0.3
Replacement battery powered ignitor/spark generator and ground wire; has 4 outlets and two larger outlets: one for a ground wire, included, and one for the old remote switch wire, not included. Uses AA battery, not included, and requires 7/8 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502184C
Part Number: P02502184C-R
Weight: 0.55
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502274C
Part Number: 03340
Weight: 0.5
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502192C
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502192C
Part Number: 03320
Weight: 0.3
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
Ignitor collector boxes with ceramic electrodes and male round connectors. SET OF FOUR (4).
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 02623-X4
Material: ceramic
Weight: 0.8
46 Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Genuine OEM 21 wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
25 wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
141.16673 Regulators and Hoses
Straight thru L.P regulator with 28 hose. Adequate to 90,000 BTU.
Replaces Kenmore factory part# P03601008A
Part Number: HR-6B
Weight: 1.50
141.16673 Accessories
Cherry wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00240
Weight: 1.14
4 Piece Stainless Steel Tool Set With Accents Turner, tong, and fork constructed of high gade, polished stainless steel, with soft grip accents. Silicone tip tongs heat resistant to 500 degrees farenheit. High quality grill brush.
Part Number: 40070
Material: stainless steel
Weight: 2.12
Stainless Steel Basting Set.
Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.
Part Number: 14913
Material: stailess steel
Weight: 0.5
Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
- Ideal for cooking pieces of meat or vegetables
- Self basting, easy to use
- Locks on spit rod with thumb screw (supplied)
- 6 1/2 x 10 long
Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2 x 10
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Kenmore 141.16673 - 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts