Home > Kenmore Grill Models > Kenmore 141.16674800
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Part diagrams and owners manuals for Kenmore model: 141.16674800
Click small image to enlarge. Click Large image to reduce. Double click for new window |
|
|
Replacement gas grill parts for Kenmore model: 141.16674800
141.16674800 Burners
Stainless steel tube burner. Includes
Replaces Kenmore factory part# P020080364
Part Number: 11631
Material: stainless steel
Weight: 0.8
Dimensions: 15 1/8 x 1
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
141.16674800 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Replaces Kenmore factory part# P01604004B
Part Number: 51631
Material: porcelain steel wire
Weight: 4.0
Dimensions:
- Front-To-Back: 19″
- Side-To_Side: 6 5/16″
Aftermarket reversible heavy cast iron
cooking grid.
- Sold individually
- Number required varies, check your grill
- Porcelain treated, flat matte finish
- Pointed side is designed for perfect sear marks
- Grooved side captures juices for continous basting
Fits: Broil King 500/625/750 series grills.
NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.
Part Number: 22005-281-R
Material: Cast iron
Weight: 5.0
Dimensions:
- Front-To-Back: 19 1/4″
- Side-To_Side: 6 1/16″
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.
Part Number: 67845-1PC
Material: matte cast iron
Weight: 5.5
Dimensions:
- Front-To-Back: 19 3/16″
- Side-To_Side: 6 1/16″
Cast iron
cooking grids,
porcelain treated, flat matte finish for Kenmore model 141.16674800.
Part Number: 67845
Material: matte cast iron
Weight: 27.2
Dimensions:
- Front-To-Back: 19 3/16″
- Side-To_Side: 30 5/16″
Cast iron
cooking grid.
Porcelain treated, flat matte finish. Sold individually.
Part Number: 69501
Material: cast iron
Weight: 4.85
Dimensions:
- Front-To-Back: 19″
- Side-To_Side: 6 1/8″
141.16674800 Igniter Components
Ignitor collector box with ceramic electrode and male
round connector.
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
See part 02623-X4 for a more econimical 4 pack.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P026090134
Part Number: 02623
Material: ceramic
Weight: 0.2
Battery powered push button igniter.
- Has four (4) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502274C
Part Number: IGEIB4-B
Weight: 0.3
Universal four-outlet battery powered push button ignitor.
- 1.5 volt
- Has four (4) terminals (male spade connector)
- Uses a single AA battery (not included)
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8 mounting hole
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502274C
Part Number: 03340
Weight: 0.5
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4 or 13/16 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502192C
Part Number: IGEIB2-B
Weight: 0.3
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4 mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# P02502192C
Part Number: 03320
Weight: 0.3
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
Push-button electronic igniter with four (4)
spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4 mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG4010
Weight: 0.2
Ignitor collector boxes with ceramic electrodes and male round connectors. SET OF FOUR (4).
- Wire not included. Commonly used with wire part# 03400.
- Designed to connect to wires with round female connector.
- If used with existing wire, confirm connector type is round where wire connects to electrode.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 02623-X4
Material: ceramic
Weight: 0.8
46 Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Weight: 0.1
Dimensions: 46
Genuine OEM 21 wire for side burner or other applications. One female
spade connector, one female
round connector.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 10342-T14
Weight: 0.05
Dimensions: 21
25 wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
Ignition connection wire used to connect battery powered spark generators to electrodes. One 46 wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
14 ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
141.16674800 Regulators and Hoses
Straight thru L.P regulator with 28 hose. Adequate to 90,000 BTU.
Replaces Kenmore factory part# P03601008A
Part Number: HR-6B
Weight: 1.50
141.16674800 Accessories
Maple wood chips.
- All natural wood smoke flavor
- Great for use in BBQ's or smokers.
- 170 cubic inches (2 lbs. approx) in resealable bag
Try with portk, lamb, poultry, and fish.
Part Number: 00270
Weight: 1.3
16 Stainless Steel Tong/Turner Combination. 16 multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
Dimensions: 16 x 4
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Deluxe non-stick flat spit basket. Attaches to 3/8 rotisserie rod with adjustable lid to secure food. 16x7.5x2
WARNING: Before ordering, please verify that your rotisserie spit rod can fit through the .48 inch x .48 squared mounting holes. Our spit rod part numbers SR-5, SR-8 and SR-43 do fit.
Part Number: 24785
Weight: 1.5
Dimensions: 7 1/2 x 16
GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.
The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanksperfect for grilling, camping, patio heaters, and more
Made in USA
Part Number: 00030
Weight: 0.1
|
Kenmore model 141.16674800. If the BBQ grill part you are looking for is not listed above, make a note of the dimensions of your original part and try searching by part category. 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts