Model: 141.166821

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Kenmore Grill Models > Kenmore 141.166821



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.

Replacement grill parts to fit Kenmore model: 141.166821


 

141.166821 Burners

Stainless steel tube burner. Includes

Replaces Kenmore factory part# P02008010A



Part Number: 11631
Material: stainless steel
Weight: 0.8
Dimensions: 15 1/8” x 1”

$31.52






Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
  • Variable length burner adjusts from 13 1/2” to 17 1/2”.
  • Includes extra hardware and mounting brackets to accommodate almost all grills.
  • Comes with complete installation instructions and diagrams.

WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for ”Ordered Wrong Part.” You will be responsible for all shipping fees.

Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7

 $19.99








 

141.166821 Cooking Grids

Porcelain steel cooking grid. Porcelain enameled, glossy finish. Sold individually.

Replaces Kenmore factory part# P01604004B



Part Number: 51631
Material: porcelain steel wire
Weight: 4.0
Dimensions:
  • Front-To-Back: 19″
  • Side-To_Side: 6 5/16″

$56.96






Aftermarket reversible heavy cast iron cooking grid.
  • Sold individually
  • Number required varies, check your grill
  • Porcelain treated, flat matte finish
  • Pointed side is designed for perfect sear marks
  • Grooved side captures juices for continous basting

Fits: Broil King 500/625/750 series grills.

NOTE: This aftermarket part, made of the same materials as the original, is a perfect replacement for original part# 22005-281 but at a much lower cost.

Part Number: 22005-281-R
Material: Cast iron
Weight: 5.0
Dimensions:
  • Front-To-Back: 19 1/4″
  • Side-To_Side: 6 1/16″

$49.09






Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually, number required varies, check your grill.

Part Number: 67845-1PC
Material: matte cast iron
Weight: 5.5
Dimensions:
  • Front-To-Back: 19 3/16″
  • Side-To_Side: 6 1/16″

$49.09






Cast iron cooking grids, porcelain treated, flat matte finish for Kenmore model 141.166821.

Part Number: 67845
Material: matte cast iron
Weight: 27.2
Dimensions:
  • Front-To-Back: 19 3/16″
  • Side-To_Side: 30 5/16″

$207.81






Cast iron cooking grid. Porcelain treated, flat matte finish. Sold individually.

Part Number: 69501
Material: cast iron
Weight: 4.85
Dimensions:
  • Front-To-Back: 19″
  • Side-To_Side: 6 1/8″

$53.94








 

141.166821 Heat Plates

Stainless steel heat plate/ Flame Tamer for Kenmore model 141.166821.

Replaces Kenmore factory part# P01708009B



Part Number: KENHP4
Material: stainless steel
Weight: 0.5
Dimensions:
  • Front-To-Back: 15 1/16″
  • Side-To_Side: 4″

$22.49






Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0130
Material: stainless steel
Weight: 0.60
Dimensions:
  • Front-To-Back: 15 1/16″
  • Side-To_Side: 4″

 $24.95

 $15.48








 

141.166821 Igniter Components

Ignitor collector box with ceramic electrode and male round connector.
  • Wire not included. Commonly used with wire part# 03400.
  • Designed to connect to wires with round female connector.
  • If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02621001K



Part Number: 02623
Material: ceramic
Weight: 0.2

$10.90






Igniter collector box, ceramic electrode with male spade connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02608002A



Part Number: 02617
Material: stainless steel
Weight: 0.3
Dimensions: 5 1/2

$15.90






Battery powered push button igniter.
  • Has four (4) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502134C



Part Number: IGEIB4-B
Weight: 0.3

$34.11






Universal four-outlet battery powered push button ignitor.
  • 1.5 volt
  • Has four (4) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502134C



Part Number: 03340
Weight: 0.5

$35.57






Battery powered push button igniter.
  • Has two (2) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502192C



Part Number: IGEIB2-B
Weight: 0.3

$34.11






Universal volt battery powered push button ignitor.
  • 1.5 volt
  • Has two (2) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502192C



Part Number: 03320
Weight: 0.3

$22.80






Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG2006
Weight: 0.2

$22.80






Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG4010
Weight: 0.2

$16.16






Ignitor collector boxes with ceramic electrodes and male round connectors. SET OF FOUR (4).

  • Wire not included. Commonly used with wire part# 03400.
  • Designed to connect to wires with round female connector.
  • If used with existing wire, confirm connector type is round where wire connects to electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 02623-X4
Material: ceramic
Weight: 0.8

$40.08






46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Weight: 0.1
Dimensions: 46

$8.29






Genuine OEM 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Weight: 0.05
Dimensions: 21

$4.32






25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.31






Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29






14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61








 

141.166821 Regulators and Hoses

Straight thru L.P regulator with 28” hose. Adequate to 90,000 BTU.

Replaces Kenmore factory part# P03601008A



Part Number: HR-6B
Weight: 1.50

$38.35








 

141.166821 Accessories

HOW TO GRILL The Complete Illustrated Book of Barbecue Techniques. Steve Raichlen presents a full-color, step-by-step technique book that gets to the core of the grilling experience by showing and telling exactly how it's done. With more than 1,000 photographs, if features over 100 techniques and recipes, from how to set up a three-zone fire to how to grill a perfect prime rib, to grilling pizza, shellfish, vegetables, tofu, fruit, and s'mores.

Part Number: 0-7611-2014-9
Material: Paperback
Weight: 3.0
Dimensions: 8” x 9 1/4”
Image not available

$20.09






15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Material: stainless steel
Weight: 0.14
Dimensions: 15

$9.92






Stainless Steel Basting Set.

Measurements inside the stainless steel bowl for accurate sauce preparation. Includes silicone basting brush.



Part Number: 14913
Material: stailess steel
Weight: 0.5

$14.41






Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.
  • Ideal for cooking pieces of meat or vegetables
  • Self basting, easy to use
  • Locks on spit rod with thumb screw (supplied)
  • 6 1/2” x 10” long


Part Number: 24764
Weight: 1.1
Dimensions: 6 1/2” x 10”

$19.30






GrillPro EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

This tank gauge will monitor your propane level, while you grill, and let's you know when you're running low on gas.

The magnetic tank gauge offers fast, accurate propane level monitoring for any size LP tank. The magnetic backing makes it easy to attach, remove, and reuse across multiple tanks—perfect for grilling, camping, patio heaters, and more
Made in USA

Part Number: 00030
Weight: 0.1


$7.60







Kenmore 141.166821 - 02-Nov-26



We ship Kenmore BBQ parts worldwide

Back to Kenmore grill parts


GRILLING  ACCESSORIES

Free USA shipping (contiguous 48 states only) on all Kenmore part orders $79 and more

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy