Model: 141.17686

replacement grill parts for all BBQ brands including DCS, Members Mark, Masterforge, Ducane, Kenmore, Broilmaster and more.
 
   Home > Kenmore Grill Models > Kenmore 141.17686



Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.

Replacement grill parts to fit Kenmore model: 141.17686


 

141.17686 Igniter Components

Ignitor collector box with ceramic electrode and male round connector.
  • Wire not included. Commonly used with wire part# 03400.
  • Designed to connect to wires with round female connector.
  • If used with existing wire, confirm connector type is round where wire connects to electrode.

See part 02623-X4 for a more econimical 4 pack.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02621001K



Part Number: 02623
Material: ceramic
Weight: 0.2

$10.90






Battery powered push button igniter.
  • Has four (4) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502134C



Part Number: IGEIB4-B
Weight: 0.3

$34.11






Universal four-outlet battery powered push button ignitor.
  • 1.5 volt
  • Has four (4) terminals (male spade connector)
  • Uses a single AA battery (not included)
  • 03610 and 03620 wires are commonly used with this igniter (not included)
  • Requires 7/8” mounting hole
  • Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502134C



Part Number: 03340
Weight: 0.5

$35.57






Battery powered push button igniter.
  • Has two (2) spade type male connectors.
  • Uses 1 AAA battery (not supplied)
  • Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502192C



Part Number: IGEIB2-B
Weight: 0.3

$34.11






Universal volt battery powered push button ignitor.
  • 1.5 volt
  • Has two (2) terminals (male spade connector)
  • Uses a single AAA battery (not included)
  • Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# P02502192C



Part Number: 03320
Weight: 0.3

$22.80






Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG2006
Weight: 0.2

$22.80






Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: TS-IG4010
Weight: 0.2

$16.16






Ignitor collector boxes with ceramic electrodes and male round connectors. SET OF FOUR (4).

  • Wire not included. Commonly used with wire part# 03400.
  • Designed to connect to wires with round female connector.
  • If used with existing wire, confirm connector type is round where wire connects to electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 02623-X4
Material: ceramic
Weight: 0.8

$40.08






46” Wire with female spade connectors and square plastic connectors.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: IG-30B
Weight: 0.1
Dimensions: 46

$8.29






Genuine OEM 21” wire for side burner or other applications. One female spade connector, one female round connector.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 10342-T14
Weight: 0.05
Dimensions: 21

$4.32






25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03400
Weight: 0.1

$5.31






Ignition connection wire used to connect battery powered spark generators to electrodes. One 46” wire.

  • Wire has female spade connector on one end and square plastic connector on the other
  • Square plastice connector attaches to spark generator
  • Female spade connector ataches to electrode

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.



Part Number: 03610
Weight: 0.05

$8.29






14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.



Part Number: 03620
Weight: 0.1

$6.61








 

141.17686 Accessories

Apple wood chips.
  • All natural wood smoke flavor
  • Great for use in BBQ's or smokers.
  • 170 cubic inches (2 lbs. approx) in resealable bag

Try with portk, lamb, poultry, and fish.

Part Number: 00230
Weight: 2.0

$8.47






15” Stainless steel tong.
  • Soft comfort grip
  • Locking mechanism


Part Number: 40259
Material: stainless steel
Weight: 0.14
Dimensions: 15

$9.92






Deluxe 13” basting mop with hardwood handle and cotton mop head. Great for spreading BBQ sauces, marinades, and glazes on meat and poultry.



Part Number: 42055
Weight: 0.2
Dimensions: 13

$8.76






Porcelain Coated Round Topper.
11” diameter x 2.5” deep porcelain coated wok with stainless steel handles and perforations. Rolled edge for rigidity and safety.

Part Number: 98130
Material: porcelain steel
Weight: 1.0
Dimensions: 11

$19.15






Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most



Part Number: 90963
Weight: 0.2

$19.30







Kenmore 141.17686 - 02-Nov-26



We ship Kenmore BBQ parts worldwide

Back to Kenmore grill parts


GRILLING  ACCESSORIES

Replacement parts orders for Kenmore grills $79 and more shipped to the USA (contiguous 48 states only) Free of charge.

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Monday, November 2, 2026

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.

Help Center     About Us     Contact us     Shipping Policy     Return Policy     Privacy Policy