Kenmore 146.10016510 | Parts

Home > Kenmore Grill Models > Kenmore 146.10016510

Kenmore LP gas grill - Red

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.

Part diagrams and owners manuals for Kenmore model: 146.10016510

Click small image to enlarge. Click Large image to reduce.
Double click for new window

Exploded parts diagram for model: 146.10016510

Replacement gas grill parts for Kenmore model: 146.10016510

146.10016510 Burners

Stainless steel burner with electrode-mounting bracket. The bracket is not used on all grill models. If your model does not use a burner-mounted electrode, just ignore the bracket.

Part Number: 16251
Dimensions: 14 3/4” x 1”
Material: stainless steel
Weight: 0.6

stainless steel burner for Kenmore model 146.10016510

$58.53

$39.99

All Kenmore Burners

146.10016510 Burner Brackets and Carryovers

Stainless steel burner cross-over for Kenmore model 146.10016510.

Part Number: 07001
Dimensions: 7 3/16” x 0 13/16”
Material: stainless steel
Weight: 0.1

$13.57

All Kenmore Burner Brackets and Carryovers

146.10016510 Cooking Grids

Cast iron cooking grids. Porcelain treated, flat matte finish. Sold as a set of two (2).

Part Number: 61622
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 24 7/8”
Material: matte cast iron
Weight: 10.2

$74.24

All Kenmore Cooking Grids

146.10016510 Heat Diffusers

Porcelain steel Heat Diffuser. Sold individually.

Part Number: 96221
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8

$26.50

$21.77

SET OF FOUR/4 PACK Stainless steel heat plate. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0193-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 2.6

$85.74

Stainless steel heat plate. Made in USA

.

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0193
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.65

$25.15

All Kenmore Heat Diffusers

146.10016510 Igniter Components

Battery powered push button igniter.

Has two (2) spade type male connectors.
Uses 1 AAA battery (not supplied)
Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB2-B
Weight: 0.3

$31.52

Universal volt battery powered push button ignitor.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

$27.78

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

Wire has female spade connector on one end and square plastic connector on the other
Square plastice connector attaches to spark generator
Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

$8.67

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

$6.58

Push-button electronic igniter with two (2) spade connectors. Black cap. 1 AAA battery (not included).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG2006
Weight: 0.2

$16.46

All Kenmore Igniter Components

146.10016510 Heat indicators and Meat Thermometers

Heat indicator with a single probe and requires a 5/16” mounting hole. Note, the back side DOES NOT have an alignment pin.

Part Number: 00021
Dimensions: 3 5/8” x 1 3/4”
Weight: 0.2

$15.90

All Kenmore Heat indicators and Meat Thermometers

146.10016510 Accessories

6 chrome plated 18” shish-ke-bab skewers

Part Number: 63371
Weight: 0.2

$14.27

Deluxe 17” stainless steel turner.

Soft comfort rubber grip
Stainless steel blade

Part Number: 43108
Material: stainless steel
Weight: 0.10

$9.48

economy basting brushes. Two brushes, 7.5” long.

Part Number: 43054
Weight: 0.1

$5.77

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

Ideal for cooking pieces of meat or vegetables
Self basting, easy to use
Locks on spit rod with thumb screw (supplied)
6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

$19.30

Grill Mitt With Neoprene Palm.

16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most

Part Number: 90963
Weight: 0.5

$17.59

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Build date: Sunday, May 5, 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.