Home > Kenmore Grill Models > Kenmore 146.16197211Kenmore 4-Burner LP gas grill with side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for the Kenmore 146.16197211
146.16197211 Burners
Stainless steel burner with electrode-mounting bracket. The bracket is not used on all grill models. If your model does not use a burner-mounted electrode, just ignore the bracket.
Replaces Kenmore factory part# 40700125
Part Number: 16251
Dimensions: 14 3/4” x 1”
Material: stainless steel
Weight: 0.6
$58.53 $39.99
146.16197211 Cooking Grids
Cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Replaces Kenmore factory part# 40900204
Part Number: 61622
Dimension Front-to-Back: 16 7/16”
Dimension Side-to-Side: 24 7/8”
Material: matte cast iron
Weight: 10.2
$74.24
Heavy duty stainless steel
cooking grid.
- 304 commercial grade stainless
- Solid 5/16” stainless rods
- Sold individually
- Made in USA .
Part Number: CLA52932S
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 12 1/4”
Material: solid 304 stainless steel rod
Weight: 6.4
$54.77
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 52932
Dimension Front-to-Back: 16 5/8”
Dimension Side-to-Side: 24 1/2”
Material: porcelain steel wire
Weight: 12.11
$100.62
146.16197211 Heat Diffusers
Porcelain steel Heat Diffuser. Sold individually.
Replaces Kenmore factory part# 40700023
Part Number: 96221
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 0.8
$26.50 $21.77
SET OF FOUR/4 PACK Stainless steel
heat plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0193-X4
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 2.6
$85.74
Stainless steel
heat plate. Made in USA
.
NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0193
Dimension Front-to-Back: 14 15/16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.65
$25.15
146.16197211 Igniter Components
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Battery powered push button igniter.
- Has two (2) spade type male connectors.
- Uses 1 AAA battery (not supplied)
- Requires 3/4” or 13/16” mounting hole.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 40800122
Part Number: IGEIB2-B
Weight: 0.3
$31.52
Universal volt battery powered push button ignitor.
- 1.5 volt
- Has two (2) terminals (male spade connector)
- Uses a single AAA battery (not included)
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Replaces Kenmore factory part# 40800122
Part Number: 03320
Weight: 0.3
$27.78
Electrode and wire. Includes mounting bolt and nut. Wire connects to spark generator with flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center). Includes an extra 16” connector wire with flat female spade end and male spade end for some applications (not shown in photo).
Replaces Kenmore factory part# 40900207
Part Number: 00162
Material: ceramic
Weight: 0.1
$8.81
Push-button electronic igniter with two (2)
spade connectors. Black cap. 1 AAA battery (not included).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: TS-IG2006
Weight: 0.2
$16.46
46” Wire with female
spade connectors and square plastic connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-30B
Dimensions: 46
Weight: 0.1
$7.10
146.16197211 Grease Trays
Stainless steel grease draining tray with grease cup and holder. Made in USA
.
Replaces Kenmore factory part# 40900029
Part Number: CLA-DS0269
Dimensions: 13 1/8” x 21 5/8”
Material: stainless steel
Weight: 3.05
$127.07
146.16197211 Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.
Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6
$22.70
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59