Home > Kenmore Grill Models > Kenmore 148.16154210Kenmore 4-Burner LP gas grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for the Kenmore 148.16154210
148.16154210 Burners
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
Premium grade 304 stainless steel tube burner. Sold individually, number required varies by grill.
Replaces Kenmore factory part# SH3118B-2004
Part Number: CLA-BS0256
Dimensions: 16 3/4 x 1
Material: stainless steel
Weight: 0.45
$28.03
148.16154210 Cooking Grids
Stainless steel
cooking grids. Sold as a set of two (2).
Part Number: 5S882
Dimension Front-to-Back: 17 7/8
Dimension Side-to-Side: 27 3/4
Material: stainless steel wire
Weight: 8.8
$139.93
148.16154210 Heat Plates
Stainless steel
heat plate/ Flame Tamer for Kenmore model 148.16154210.
Part Number: KENMFHP1
Dimension Front-to-Back: 15 5/8
Dimension Side-to-Side: 4 1/8
Material: stainless steel
Weight: 0.85
$27.98
148.16154210 Igniter Components
Electrode assembly. Includes:
- Ceramic electrode
- Gas collector box
- 40 connector wire with female spade connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03118
Material: ceramic
Weight: 0.2
$9.89
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has four(4) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03344
Dimensions: 2 x 2 1/2
Weight: 0.5
$37.92
Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03621
Dimensions: 1 1/8 x 1 1/8
Weight: 0.1
$6.26
148.16154210 Heat indicators and Meat Thermometers
Heat indicator with a single probe and requires a 5/16 mounting hole. Note, the back side DOES NOT have an alignment pin.
Part Number: 00021
Dimensions: 3 5/8 x 1 3/4
Weight: 0.2
$15.90
148.16154210 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60