Home > Kenmore Grill Models > Kenmore 148.16656011Kenmore 4-Burner LP gas grill with infrared sear burner and side burner
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts to fit Kenmore model: 148.16656011
148.16656011 Burners
Premium grade 304 stainless steel tube burner. Sold individually, number required varies by grill.
Replaces Kenmore factory part# L3018S-00-2700
Part Number: CLA-BS0256
Dimensions: 16 3/4 x 1
Material: stainless steel
Weight: 0.45
$28.03
Premium grade 304 stainless steel tube burner for Kenmore model 148.16656011.
Replaces Kenmore factory part# L3018S-00-2700
Part Number: KENMFT1
Dimensions: 16 3/4 x 1
Material: stainless steel
Weight: 1.0
$35.15
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
148.16656011 Cooking Grids
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Replaces Kenmore factory part# L3018S-00-2001
Part Number: 67252
Dimension Front-to-Back: 17 5/8
Dimension Side-to-Side: 20 1/4
Material: gloss cast iron
Weight: 9.2
$77.38
Cast iron
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Also available in more economical 3 & 4 grid sets. See part numbers 67243 and 67241-4PC.
Replaces Kenmore factory part# L3018S-00-2002
Part Number: 67241
Dimension Front-to-Back: 17 5/8
Dimension Side-to-Side: 8 3/4
Material: gloss cast iron
Weight: 3.12
$46.55
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 67241-UNI
Dimension Front-to-Back: 17 5/8
Dimension Side-to-Side: 8 3/4
Material: porcelain cast iron
Weight: 5.55
$46.39
148.16656011 Heat Plates
Stainless steel
heat plate/ Flame Tamer for Kenmore model 148.16656011.
Replaces Kenmore factory part# L3018S-00-2007
Part Number: KENMFHP1
Dimension Front-to-Back: 15 5/8
Dimension Side-to-Side: 4 1/8
Material: stainless steel
Weight: 0.85
$27.98
148.16656011 Igniter Components
Electrode assembly. Includes:
- Ceramic electrode
- Gas collector box
- 40 connector wire with female spade connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03118
Material: ceramic
Weight: 0.2
$9.89
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.
Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part
03621. Inspect your system.
- 1.5 volt
- Has five (5) spark outlets (male spade connector)
- Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 2 5/8
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03352
Dimensions: 3 3/8 x 2
Weight: 0.7
$39.89
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
148.16656011 Grease Trays
Stainless steel drip tray - grease collection pan; no drain hole in the tray and no grease cup. Replaces OEM # P3018-00-1002. Made in USA
Part Number: CLA-DS0297
Dimensions: 11 13/16 x 7 7/16
Material: stainless steel
Weight: 1.3
$49.70
148.16656011 Accessories
Cast iron smoker box with six oblong venting holes. Designed to release wood smoke. Make sure this part will fit into your grill before ordering 8 3/8” x 5 1/4” x 1 3/8”.
Part Number: 00150
Dimensions: 5 1/4 x 8 3/8
Material: cast iron
Weight: 3.90
$25.40
15 Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Deluxe 13 basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8 x 3 1/2
Weight: 0.7
$25.57