Home > Kenmore Grill Models > Kenmore 148.23682310
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.
Replacement grill parts for the Kenmore 148.23682310
148.23682310 Burners
Adjustable universal front-to-back tube burner with top-ported flame holes. This burner may not work with existing ignition electrodes and back burner cross-overs.
- Variable length burner adjusts from 13 1/2 to 17 1/2.
- Includes extra hardware and mounting brackets to accommodate almost all grills.
- Comes with complete installation instructions and diagrams.
WARNING: Before ordering this universal burner, please verify that it will work in your grill per the specifications above. If you order this universal burner and it does not work in your grill, please review our Return Policy for Ordered Wrong Part. You will be responsible for all shipping fees.
Part Number: FP-BR1001
Material: stainless steel
Weight: 0.7
$19.99
Premium grade 304 stainless steel tube burner. Sold individually, number required varies by grill.
Replaces Kenmore factory part# SH3118B-2004
Part Number: CLA-BS0256
Dimensions: 16 3/4 x 1
Material: stainless steel
Weight: 0.45
$28.03
148.23682310 Cooking Grids
Cast iron
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Also available in more economical 3 & 4 grid sets. See part numbers 67243 and 67241-4PC.
Part Number: 67241
Dimension Front-to-Back: 17 5/8
Dimension Side-to-Side: 8 3/4
Material: gloss cast iron
Weight: 3.12
$46.55
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 67241-UNI
Dimension Front-to-Back: 17 5/8
Dimension Side-to-Side: 8 3/4
Material: porcelain cast iron
Weight: 5.55
$46.39
Cast iron
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 67252
Dimension Front-to-Back: 17 5/8
Dimension Side-to-Side: 20 1/4
Material: gloss cast iron
Weight: 9.2
$77.38
148.23682310 Heat Plates
Stainless steel
heat plate/ Flame Tamer for Kenmore model 148.23682310.
Part Number: KENMFHP1
Dimension Front-to-Back: 15 5/8
Dimension Side-to-Side: 4 1/8
Material: stainless steel
Weight: 0.85
$27.98
148.23682310 Igniter Components
Electrode assembly. Includes:
- Ceramic electrode
- Gas collector box
- 40 connector wire with female spade connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03118
Material: ceramic
Weight: 0.2
$9.89
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4 x 1
Weight: 0.1
$19.80
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch.
Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part
03621. Inspect your system.
- 1.5 volt
- Has five (5) spark outlets (male spade connector)
- Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8 mounting hole
- Overall dimensions: 2 x 3 3/8 x 2 5/8
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03352
Dimensions: 3 3/8 x 2
Weight: 0.7
$39.89
148.23682310 Heat indicators and Meat Thermometers
Heat indicator with a single probe and requires a 5/16 mounting hole. Note, the back side DOES NOT have an alignment pin.
Part Number: 00021
Dimensions: 3 5/8 x 1 3/4
Weight: 0.2
$15.90
148.23682310 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
Meat Claws. Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.
Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5
$16.16
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59