Parts for Kenmore 152043

Home > Kenmore Grill Models > Kenmore 152043

We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.

Replacement grill parts for Kenmore model: 152043

152043 Burners

Stainless steel U burner. Includes burner, mounting bracket, drip bar, and hardware.

Part Number: 13702
Dimensions: 26 3/4” x 3 9/16”
Material: stainless steel
Weight: 2.5

stainless steel burner for Kenmore model 152043

$54.77

All Kenmore Burners

152043 Cooking Grids

Commercial grade 304 stainless steel cooking grid with 1/4” diameter rods. Made in USA

.

Part Number: CG-45SS
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: Stainless steel
Weight: 6.0

$76.13

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

Made in USA
304 commercial grade stainless steel
Solid .225 diameter stainless rods
Sold individually

Part Number: 55701-SS
Dimension Front-to-Back: 14”
Dimension Side-to-Side: 24”
Material: stainless steel
Weight: 5.0

$76.13

ONE PANEL. Genuine OEM cast iron cooking grid, single panel.

Sold individually
Number required varies
Porcelain treated, flat matte finish.

Part Number: 10225-T406
Dimension Front-to-Back: 14 1/8”
Dimension Side-to-Side: 12 1/4”
Material: Cast iron
Weight: 4.75

$43.93

All Kenmore Cooking Grids

152043 Rock Grates

Rock grate for holding lava rock or ceramic briquettes for Kenmore model 152043.

Part Number: BG-38
Dimensions: 10 3/4” x 22 1/4”
Material: carbon steel
Weight: 3.5

$27.91

All Kenmore Rock Grates

152043 Vaporiser Bar

Stainless steel Vaporiser Bar (heat plate). Fits Charbroil MasterFlame series 7000 grills, others.

Part Number: 94171
Dimension Front-to-Back: 23 7/16”
Dimension Side-to-Side: 2 1/2”
Material: stainless steel
Weight: 0.6

$19.81

All Kenmore Vaporiser Bar

152043 Igniter Components

25” wire with female spade connector on one end, and female round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is round connector to electrode, spade (flat) connector to igniter.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03400
Weight: 0.1

$5.35

36” wire with two female spade connectors for side burner igniters (not for use with rotary or piezo ignitors).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03500
Weight: 0.05

$5.35

Ceramic electrode with male spade connector and mounting bracket for Kenmore models with U-shaped burners. Attaches directly to burner.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04410
Material: ceramic
Weight: .05

$8.58

All Kenmore Igniter Components

152043 Accessories

Durable 2 5/16” round briquettes

Self-cleaning
Control flare-ups while holding an even heat pattern.
About 53 pieces, covers approximately 275 sq. inches.
Fits all gas grills

Part Number: BQ-5
Weight: 7.2

$31.19

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

$24.48

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

$22.60

BBQ'er choice porcelain grill briquets. The finest available.

Self-Cleaning Porcelain Briquettes.
Made of fired porcelain for even heat transfer.
Virtually indestructible.
About 56 pieces covers approximately 310 square inches.
Made in USA .

NOTE: MHP model TJK requires two (2) bags.

Part Number: BQ-3A
Weight: 4.2

$42.81

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

$14.99

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

$14.41

Upright porcelain steel roasting rack with grid topper.

Part Number: 40935
Weight: 2.9

$31.80

$21.99

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1

$7.60

All Accessories

Copyright © 2004, 2008, 2020 clagrills.com All rights reserved
Date built: Monday, May 20 2024

All trademarks the property of their respective owners, and are not affiliated with CLA Grills & Service or it's products.