Home > Kenmore Grill Models > Kenmore 16109
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.
Replacement grill parts to fit Kenmore model: 16109
16109 Venturis
Spider exclusion screens. Installs over venturi air shutters to keep spiders out. Approximately 7/8” in diameter and 1” long.
Part Number: 70002
Dimensions: 1” x 7/8”
Material: stainless steel
Weight: 0.1
$12.82
16109 Cooking Grids
Porcelain steel
cooking grid.
Porcelain enameled, glossy finish. Sold individually.
Part Number: 51091
Dimension Front-to-Back: 13 3/4”
Dimension Side-to-Side: 28 3/8”
Material: porcelain steel wire
Weight: 3.9
$67.78
16109 Heat Tents
Porcelain steel heat tent. Sold individually.
Part Number: 91091
Dimension Front-to-Back: 26 15/16”
Dimension Side-to-Side: 6 1/8”
Material: porcelain steel
Weight: 2.5
$36.06
16109 Igniter Components
Push-Button self-grounding
piezo spark generator; requiers 3/4” mounting hole. Primary connector is a round male connector, so connecting wire needs to be female
round connector. If needed, see part#
03199C for a short adapter wire that converts flat female
spade connectors to female round. Secondary connector is a flat male
spade connector used to conduct spark to a secondary electrode, such as a side burner, or used as a ground in some applications. See ground wire part#
03620. For more information, see our article
Ignition 101.
Part Number: 03120
Weight: 0.1
$9.77
25” wire with female
spade connector on one end, and female
round connector on the other end. Commonly used to connect electrodes to igniters. Typical installation is
round connector to electrode, spade (flat) connector to igniter.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03400
Weight: 0.1
$5.35
36” wire with two female
spade connectors for side burner igniters (not for use with rotary or
piezo ignitors).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03500
Weight: 0.05
$5.35
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers 115C2, 12102, 11512, and 12112.
Includes:
- Gas collector box
- Ceramic electrode and connecting wire with male round connector
- Mounting nuts and bolts
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04400R
Weight: 0.3
$9.34
Collector box and ceramic electrode with male
spade connector for models with 12112 or 11512 burners. Attaches directly to burner.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04420
Material: ceramic
Weight: 0.1
$9.89
Ignitor electrode and collector box assembly. Fits all grills equiped with the Charbroil Masterflame and MasterFlame II burner systems, including grill brands Charbroil, Coleman, Kenmore, and Thermos. Fits on our burner part numbers BBC, LBBC, TBBC, and TLBBC.
Includes:- Gas collector box
- Ceramic electrode and wire
- Mounting hardware
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-11B
Weight: 0.3
$9.34
Snap In
Piezo Ignitor. Fits Weber Genesis Silver A,B,C and Newer Spirit E310 & E320.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: UP-9B
Weight: 0.2
$8.38
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
16109 Accessories
Texas hickory flavor wood chips. 800g.
Part Number: 00220
Weight: 2.0
$6.87
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59