Kenmore 16539

Stainless steel straight pipe burner; uses electrode/wire # 04432 for Kenmore model 16539.

Part Number: 16781
Dimensions: 14 11/16” x 1”
Material: stainless steel
Weight: 0.7

Set of two channel formed U-shaped cooking grids, commercial grade 304 stainless steel. Channel steel is rolled steel stamped in a U-shape; is not solid round rods.

Part Number: 538S2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 1/2”
Material: stamped stainless steel
Weight: 6.0

Cast iron cooking grids (set of 2). Porcelain treated, flat matte finish.

Part Number: 69112
Dimension Front-to-Back: 17 3/16”
Dimension Side-to-Side: 23 1/4”
Material: cast iron
Weight: 9.0

Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.

• Made in USA
• Commercial grade 304 stainless steel
• 5/16” solid stainless rods
• Sold as a set of two (2).

Each panel measures:

• Front-to-Back: 17 3/8”
• Side-to-Side: 11 3/4”

Total Side-to-Side: 31 5/16”

Part Number: 53801-SS-X2
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 15.6

Premium quality stainless steel cooking grid. Far superior to the porcelain coated steel grids it replaces.

• Made in USA
• 304 commercial grade stainless steel
• 5/16” solid rods
• Sold individually

Fits: Beaumark, Broil-Mate, Broil King, Centro, Charbroil, Charmglow, Costco, Front Avenue, Grand Hall, Great Outdoors, Grill Chef, John Deere, Kalamazoo, Kenmore, Kmart, Martha Stewart, Master Chef, Members Mark, Nexgrill, Patio Chef, S.R.Potten, Sams, Savor Pro, Sonoma, Sure Heat, Thermos, Uniflame, Vermont Castings, Wal Mart, Walmart, Weber. May fit others.

Part Number: 53801-SS
Dimension Front-to-Back: 17 3/8”
Dimension Side-to-Side: 11 3/4”
Material: stainless steel
Weight: 7.8

Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.

Each panel measures:

• Front-to-Back: 17 5/16”
• Side-to-Side: 11 11/16”

Total Side-to-Side: 23 3/8”

Part Number: 69112-UNI-X2
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 23 3/8”
Material: cast iron
Weight: 14.7

Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69112-UNI-X2 for a set of two (2) grids.

Part Number: 69112-UNI
Dimension Front-to-Back: 17 5/16”
Dimension Side-to-Side: 11 11/16”
Material: cast iron
Weight: 7.35

Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 0.8

Stainless steel Flame Tamer for Kenmore model 16539.

Part Number: NGKHP3
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 9/16”
Material: stainless steel
Weight: 1.0

SET OF FOUR/4 PACK Stainless steel heat plate/Flame Tamer. Made in USA .

NOTE: Sometimes shipped with vinyl peel-off coating. Remove before use.

Part Number: CLA-TS0153-X4
Dimension Front-to-Back: 15 1/8”
Dimension Side-to-Side: 5 5/8”
Material: stainless steel
Weight: 3.2

Replacement electrode.

• Ceramic insulator
• 25” wire with female spade connector
• Locking nuts.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 01190
Material: ceramic
Weight: 0.2

Battery powered push button igniter.

• Has four (4) spade type male connectors.
• Uses 1 AAA battery (not supplied)
• Requires 3/4” or 13/16” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IGEIB4-B
Weight: 0.3

Universal four-outlet battery powered push button ignitor.

• 1.5 volt
• Has four (4) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole
• Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.

• Wire has female spade connector on one end and square plastic connector on the other
• Square plastice connector attaches to spark generator
• Female spade connector ataches to electrode

See part 03610-X4 for a more economical 4-pack.

NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.

Part Number: 03610
Weight: 0.05

14” ground wire with female spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03620
Weight: 0.1

Push-button electronic igniter with four (4) spade connectors. Black cap. Uses one AAA battery (not included). Requires a 3/4” mounting hole.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: TS-IG4010
Weight: 0.2

shishkebob skewers

Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Deluxe 13” basting mop with hardwood handle and cotton mop head.

Part Number: 42055
Dimensions: 13
Weight: 0.2

Deluxe non-stick chicken and rib tumble basket. Attaches to rotisserie spit rod.

• Ideal for cooking pieces of meat or vegetables
• Self basting, easy to use
• Locks on spit rod with thumb screw (supplied)
• 6 1/2” x 10” long

Part Number: 24764
Dimensions: 6 1/2” x 10”
Weight: 1.1

Replacement heads for grill brush 77600. Set of two.

Part Number: 77650
Weight: 0.3