Home > Kenmore Grill Models > Kenmore 16657
We recommend you measure your old parts and compare them to what we show below. This will help insure that you get the correct replacement parts for your Kenmore grill. This is best done with the old parts out of the grill. Verify your Kenmore grill model number.
Replacement grill parts to fit Kenmore model: 16657
16657 Burners
Stainless steel burner for Kenmore model 16657.
Part Number: 14741
Dimensions: 15 15/16” x 1”
Material: stainless steel
Weight: 0.5
$33.83
16657 Cooking Grids
Stamped stainless steel
cooking grids (set of 3). Each grid is a grid-in-tray assembly, so there is actually a total of 6 pieces.
Part Number: 5S483
Dimension Front-to-Back: 18 7/16”
Dimension Side-to-Side: 26 5/8”
Material: stamped stainless steel
Weight: 15.4
$208.84
Reversible, heavy cast iron
cooking grids.
Porcelain treated, flat matte finish. Sold as a set of two (2).
Part Number: 66652
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 26 1/4”
Material: matte cast iron
Weight: 19.35
$168.70 $119.99
Reversible, heavy cast iron
cooking grids.
Porcelain treated, flat matte finish. SOLD INDIVIDUALLY
Part Number: 66652-1PC
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 13 1/8”
Material: matte cast iron
Weight: 10.0
$119.95 $63.28
Premium universal cooking grids. Set of two (2) grids. Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 18 1/4”
- Side-to-Side: 13 1/8”
Total Side-to-Side: 26 1/4”Part Number: 66652-UNI-X2
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 26 1/4”
Material: cast iron
Weight: 18.8
$111.52
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 66652-UNI-X2 for a set of two (2) grids.
Part Number: 66652-UNI
Dimension Front-to-Back: 18 1/4”
Dimension Side-to-Side: 13 1/8”
Material: cast iron
Weight: 9.4
$61.91
16657 Cooking Grates
Stamped stainless steel
cooking grids. SOLD AS A SET OF THREE (3) PIECES ONLY.
WARNING: This
cooking grid set does not include the bottom trays. For the grid in tray set see part # 5S483.
Part Number: 5S473
Dimension Front-to-Back: 18 7/16”
Dimension Side-to-Side: 26 5/8”
Material: stamped stainless steel
Weight: 8.0
$110.32
16657 Heat Plates
SET OF FOUR/4 PACK Flame Tamer, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0141-X4
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 3.92
$56.88
Flame Tamer, stainless steel. Made in USA
.
NOTE: Sometimes shipped with protective vinyl peel-off coating. Remove before use.
Part Number: CLA-TS0141
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.98
$21.87
16657 Flame Tamers
Porcelain steel Flame Tamer. Sold individually.
Part Number: 93321
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 13/16”
Material: porcelain steel
Weight: 1.0
$25.40 $20.90
Stainless steel aftermarket Flame Tamer
heat plate.
- Stainless equivalent of part 93321
- Superior to the porcelain steel originals
- Rust and corrosion restitant
- Sold individually
- Made in USA
Part Number: 93321-SS
Dimension Front-to-Back: 16”
Dimension Side-to-Side: 3 3/4”
Material: stainless steel
Weight: 0.7
$21.87
16657 Igniter Components
Electrode, gas collector box, and wire. The connecting wire has a flat female
spade connector, which is typically used with electronic (battery operated) ignitors (see
Ignition 101 in our help center).
NOTE: This electrode is also sometimes used with push-button or rotary
piezo ignitors, such as our part#
03100 and
03120, which have
round connectors. When connecting 01472 electrode to ignitors with
round connectors, use short wire part#
03199C to convert the electrode wire from a femal
spade connector to a female
round connector.
Part Number: 01472
Material: ceramic
Weight: 0.1
$10.87
Universal battery powered push button ignitor.
- 1.5 volt
- Has six (6) terminals (male spade connector)
- Uses a single AA battery (not included))
- 03610 and 03620 wires are commonly used with this igniter (not included)
- Requires 7/8” mounting hole
- Overall dimensions: 2” x 3 3/8” x 3”
- Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03350
Weight: 0.7
$31.96
Ignition connection wire used to connect battery powered spark generators to electrodes. One 47” wire.
- Wire has female spade connector on one end and square plastic connector on the other
- Square plastice connector attaches to spark generator
- Female spade connector ataches to electrode
See part 03610-X4 for a more economical 4-pack.
NOTE: For more information on grill ignition systems, including how to connect electrodes to spark generators/ignitors, see article Ignition 101 in our help center.
Part Number: 03610
Weight: 0.05
$8.67
14” ground wire with female
spade connector and eye connectors. For use with 1.5 volt (AA or AAA) spark generators including 03340 and 03350.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03620
Weight: 0.1
$6.58
Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03199C
Weight: 0.05
$4.37
16657 Heat indicators and Meat Thermometers
Semi-circular, snap in heat indicator with 2 3/4” heat prob for Kenmore model 16657.
Part Number: 00473
Dimensions: 1 3/4” x 1 3/16”
Material: stainless steel
Weight: 0.1
$14.09
16657 Accessories
Skewers for part 92339 kebob tray.
Part Number: 11040
Weight: 0.4
$4.75
15” Stainless steel tong.
- Soft comfort grip
- Locking mechanism
Part Number: 40259
Dimensions: 15
Material: stainless steel
Weight: 0.14
$9.92
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.
Part Number: 00030
Weight: 0.1
$7.60