Home > Kenmore Grill Models > Kenmore 22559 LP
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Kenmore grill.
Replacement grill parts for the Kenmore 22559 LP
22559 LP Burners
Stainless steel burner and venturi assembly kit. Contains one standard EDSB SS H burner and two (2) V-12 stainless steel single adjustable venturi..
Part Number: EDSB+V-11
Material: stainless steel
Weight: 2.0
Dimensions: 7 1/4” x 15 1/2”
Stainless steel burner and venturi assembly kit. Comes with all necessary gaskets and screws.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502-70301
Material: stainless steel
Weight: 3.0
Dimensions: 15 7/8” x 8”
Stainless steel H burner. Includes special bracket for optional 03900 burner-mounted collector box and electrode with wire. The 03900 electrode & box is a good solution for applications where the original OEM electrode cannot be used.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive early Nov.
Part Number: 10502
Material: stainless steel
Weight: 2.5
Dimensions: 15 7/8” x 8”
Cast iron burner and venturi assembly kit. Comes with all necessary gaskets and screws.
Part Number: 20502-70301
Material: cast iron
Weight: 8.0
Dimensions: 15 7/8” x 8”
cast iron burner head for Kenmore model 22559 LP.
Part Number: 20502
Material: cast iron
Weight: 7.7
Dimensions: 15 7/8” x 8”
22559 LP Venturis
Single Gasket Kit Economy Burners for Kenmore model 22559 LP.
Part Number: SHK4
Weight: 0.01
Stainless steel single venturi, sold individually. Flexible and adjustable from 5.5” to 8”. Gasket & screws not included, see part # SHK4.
Part Number: V-11
Material: stainless steel
Weight: .3
Dimensions: 7
70301 is a straight single venturi that adjusts from 5 1/8” to 7”. Includes all necessary gaskets and screws/nuts.
Part Number: 70301
Material: zinc plated steel
Weight: 0.5
22559 LP Cooking Grids
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids. Fits some Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, and Sterling grills. Check your model to be sure. May fit others.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2) panels
Each panel measures:- Front-to-Back: 14 3/8”
- Side-to-Side:11 3/4”
Total Side-to-Side: 23 1/2”
Part Number: 51302-SS-X2
Material: Stainless steel
Weight: 3.7
Dimensions:
- Front-To-Back: 14 3/8″
- Side-To_Side: 11 3/4″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits Arkla, Arklamatic, Charmglow, Embermatic, Kenmore, Sterling and more.
Part Number: 51302-SS
Material: Stainless steel
Weight: 3.7
Dimensions:
- Front-To-Back: 14 3/8″
- Side-To_Side: 11 3/4″
Premium stainless steel cooking grids. Set of two (2) grids. Far superior to porcelain coated steel grids.
- Made in USA

- Commercial grade 304 stainless steel
- .225” solid stainless rods
- Sold as a set of two (2).
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 11 3/8”
Total Side-to-Side: 22 3/4”
Part Number: 54632-SS-X2
Material: stainless steel
Weight: 6.8
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 22 3/4″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- Made in USA

- 304 commercial grade stainless steel
- Solid .225 diameter stainless rods
- Sold individually
Fits grills by Arkla, Falcon, Charbroil, Kenmore and Thermos. May fit others.
Part Number: 54632-SS
Material: stainless steel
Weight: 3.40
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 11 3/8″
Premium universal cooking grids. Set of two (2). Porcelain treated cast iron. Matte finish.
Each panel measures:- Front-to-Back: 15”
- Side-to-Side: 12”
Total Side-to-Side: 24”
Part Number: 61702-UNI-X2
Material: cast iron
Weight: 12.9
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 24″
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 61702-UNI-X2 for a set of two (2).
Part Number: 61702-UNI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 12″
Chrome/nickel plated
cooking grid. Sold individually, two (2) required. Made in USA

.
Part Number: CG-13
Material: Chrome steel
Weight: 2.4
Dimensions:
- Front-To-Back: 14 1/4″
- Side-To_Side: 11 7/8″
Cast iron
cooking grid.
Porcelain treated, matte finish. Sold individually, number required varies by grill model
Part Number: CG-61P-CI
Material: cast iron
Weight: 6.45
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 12″
Premium quality stainless steel
cooking grid. Far superior to the porcelain coated steel grids it replaces.
- 304 commercial grade stainless steel
- .225 diameter stainless rods
- Made in USA

- Sold individually; grill may require more than one grid
Part Number: CG-9SS
Material: Stainless steel
Weight: 3.7
Dimensions:
- Front-To-Back: 14 3/8″
- Side-To_Side: 11 3/4″
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 51302
Material: porcelain steel wire
Weight: 4.5
Dimensions:
- Front-To-Back: 14 5/16″
- Side-To_Side: 24″
Porcelain steel
cooking grids.
Porcelain enameled, glossy finish. Sold as a set of two (2).
Part Number: 54632
Material: porcelain steel wire
Weight: 6.13
Dimensions:
- Front-To-Back: 14 15/16″
- Side-To_Side: 23 7/8″
Cast iron
cooking grids (set of 2).
Porcelain enameled, glossy finish. These grids have a slight bow in the middle and were designed to replace some original factory grids with this bow.
Part Number: 61702
Material: gloss cast iron
Weight: 11.0
Dimensions:
- Front-To-Back: 15″
- Side-To_Side: 24″
22559 LP Rock Grates
carbon steel
rock grate for Kenmore model 22559 LP.
Part Number: 91601
Material: steel wire
Weight: 3.8
Dimensions:
- Front-To-Back: 12 1/2″
- Side-To_Side: 21 11/32″
22559 LP Igniter Components
20” Ignitor adapter wire with female
spade connector and male
round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03750
Weight: 0.05
Dimensions: 1/16
Universal adapter wire with male round and female
spade connectors.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03751
Weight: 0.05
Tongue style collector box for burner mounted applications. Includes preinstalled electrode with round female connector end and 20” wire. Fits on all of our Deluxe stainless H burners (LB, SB, DLB, DSB) using special mounting bracket on these burners. Will not fit on cast iron burners (see part IG-15B for cast iron burner applications).
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-5B
Weight: 0.3
Collector box and electrode assembly. Tongue style burner mounted collector box with ceramic electrode, 15” wire, and female
round connector. Not designed to mount on original equipment burners. Fits our stainless steel burners with special mounting bracket only.
Will NOT fit on cast iron burners.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03900
Material: ceramic
Weight: 0.2
Universal collector box with electrode and wire. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: IG-15B
Weight: 0.3
22559 LP Accessories
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA
.
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.
Part Number: 45887
Material: pummise
Weight: 7.0
6 chrome plated 18” shish-ke-bab skewers
Part Number: 63371
Weight: 0.2
Ceramic briquette. Briquettes collect heat and radiate it to the food on the
cooking grids. They also help prevent flare-ups and keep the flames from actually touching the food allowing for more efficient and uniform heat distribution.
Designed primarily to work in stainless steel trays on Lynx, Alfresco, and other brand grills, these briquettes can be and often are used on any grill with an ordinary grate to support them.
- Individual briquettes measure 2” x 2”
- Set includes 28 ceramic briquettes
- More than one set may be required per grill model
Part Number: BQLYX
Material: ceramic
Weight: 4.0
Dimensions: 2” x 2”
Polished stainless steel turner with an ergonomic soft grip grey handle and red accents. Great for flipping burgers or turning delicate fish fillets.
Part Number: 43108
Material: stainless steel
Weight: 0.10
Dimensions: 16
Marinade Injector.For injecting flavor and marinades into meat. Great for use with chicken, beef, pork, lamb etc. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber. Easy to use and clean.
Part Number: 14950
Material: stailess steel
Weight: 0.5
Rib & Roast Rack. Reversible rib rack and roast support. Made of stainless steel with a frame that holds 6 racks of ribs and a roast support for large cuts of meat.
Part Number: 41616
Material: stainless steel
Weight: 0.5
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.2
|
Kenmore grill model 22559 LP. Some parts not specific to a grill brand or model like regulators, posts, and heat indicators, which are listed in our repair parts section. 02-Nov-26
|
We ship Kenmore BBQ parts worldwide
Back to Kenmore grill parts