Kenmore 415.16128010

Stainless steel burner for Kenmore model 415.16128010.

Replaces Kenmore factory part# G430-3800-W2

Part Number: 15491
Dimensions: 14 3/8” x 1”
Material: stainless steel
Weight: 0.9

Stainless steel cross over tube. Channels gas between burners.

Replaces Kenmore factory part# G413-0004-W2

Part Number: CBCO1
Dimensions: 7
Material: stainless steel
Weight: 0.05

Burner crossover tube for Kenmore model 415.16128010.

Replaces Kenmore factory part# G413-0004-W2

Part Number: 05590
Dimensions: 7 1/4” x 0 3/4”
Material: stainless steel
Weight: 0.1

Porcelain steel cooking grids. Porcelain enameled, glossy finish. Sold as a set of two (2).

Replaces Kenmore factory part# G550-0200-W1

Part Number: 52682
Dimension Front-to-Back: 16 13/16”
Dimension Side-to-Side: 28 3/4”
Material: porcelain steel wire
Weight: 5.9

Porcelain steel Flame Tamer. Sold individually.
Also known as part number G550-0006-W1.

Replaces Kenmore factory part# G550-0006-W1

Part Number: 96281
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 4 1/4”
Material: porcelain steel
Weight: 1.0

Stainless steel aftermarket flame tamer.

• Stainless equivalent of part 96281
• Superior to the porcelain steel originals
• Rust and corrosion restitant
• Sold individually
• Made in USA

Alao known as part number G550-0006-W1.

Part Number: 96281-SS
Dimension Front-to-Back: 14 1/2”
Dimension Side-to-Side: 4 1/4”
Material: stainless steel
Weight: 0.6

Universal 2 5/8” adapter wire with female round and male spade connectors. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

• Can change male round to male spade
• Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

Burner mounted replacement electrode for use with burner 15641.

• Ceramic insulator
• Wire with female spade connector

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03351
Material: ceramic
Weight: 0.2

Small AA battery powered push button spark generator.

• 1.5 volt
• Has two (2) terminals (male spade connector)
• Uses a single AA battery (not included)
• 03610 and 03620 wires are commonly used with this igniter (not included)
• Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# G409-0021-W1

Part Number: 03342
Weight: 0.3

Burner mounted electrode for use with 15591 and 15491 burners.

• 39” wire with female spade connector
• Includes adapter wire part 03198 for applications needing male spade connector on electrode.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# G501-0010-W2

Part Number: 04430
Material: ceramic
Weight: 0.1

Electrode with 24.5” wire that has a female spade/flat end for Kenmore model 415.16128010. To lengthen the wire use adapter # 03198 and extension wire # 03750.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Replaces Kenmore factory part# G501-0010-W1

Part Number: 04432
Dimensions: 4”
Material: ceramic
Weight: 0.1

20” Ignitor adapter wire with female spade connector and male round connector. Used primarily on Ducane models 7100 and 7200 to extend the wire from the 03758 collector box and electrode to the electronic spark generator (igniter).

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03750
Dimensions: 1/16
Weight: 0.05

Round heat indicator.

• Single probe
• 1 13/16” diameter
• Requires 3/8” mounting hole

Replaces Kenmore factory part# G430-0022-W1

Part Number: 00018
Dimensions: 1 13/16” x 1 13/16”
Weight: 0.1

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.

Part Number: 40269
Material: stainless steel
Weight: 0.14

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Stainless steel WOK topper with serving handles. Ideal for seafood and vegatables.

Part Number: 96321
Dimensions: 12 3/4” x 12 3/4”
Material: stainless steel
Weight: 1.6

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1