Home > MHP Grill Models > MHP GJK3-N
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
Replacement grill parts for the MHP GJK3-N
GJK3-N Burners
Genuine OEM MHP stainless steel H Burner for JNR and GJK Burner only for MHP model GJK3-N.
Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0
$52.30
Cast stainless steel oval burner. Fits W3G, T3G, WHRG, THRG, GHJK.
Part Number: GG-HCSSB
Weight: 0.8
$125.80
Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, if needed, see catetory Repair Parts part number GG-IBC.)
Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05
$137.23
GJK3-N Cooking Grids
Heavy-duty stainless steel
cooking grid for GJK, WNK, and TJK series grills.
- High grade stainless
- 5/16” solid stainless rods
- Sold individually.
Part Number: GG-SS-GRID
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 6.0
$102.11
GJK3-N Rock Grates
Premium grade stainless steel
rock grate with 1/4” rods for WNK & TJK model grills for MHP model GJK3-N.
Part Number: HH-GRATE-SS
Dimensions: 13 5/8” x 18”
Weight: 5.5
$73.70
GJK3-N Igniter Components
Ignitor shield.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-DEF
Weight: 0.3
$13.45
Electronic Ignitor module.
- Two outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB
Weight: 0.3
$31.52
Hybrid Electronic Ignitor module.
- Four outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB4
Weight: 0.3
$31.52
12” igniter connecting wire for battery-operated electronic igniters. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
Igniter collector box for GJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-IB
Weight: 0.15
$14.32
Hybrid burner collector box.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-HIB
Weight: 0.2
$13.80
Infrared/Hybrid Ignitor Probe
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IIP
Weight: 0.02
$12.58
Infrared Hybrid Probe Shield
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IPS
Weight: 0.03
Image not available
$6.08
GJK3-N Regulators and Hoses
Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.
Part Number: ASCPL-3
Weight: 0.4
$33.61
Five piece 3/8” natural gas quick disconnect set includes:
- Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
- Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
- Hansen & Sturgis dust cover
- plastic dust plug
- Plastic 3/8 MPT Snap Tite
- Suitable up to approximately 60,000 BTU.
Part Number: ASCPL-1
Weight: 3.0
$75.71
GJK3-N Miscellaneous Repair Parts
Infrared burner clip, one, and two cotter pins for MHP model GJK3-N.
Part Number: GG-IBC
Material: stainless steel
Weight: 0.02
Image not available
$3.63
GJK3-N Accessories
6 deluxe chrome plated 22” shish-ke-bab skewers with wooden handles
Part Number: 40538
Material: chrome steel
Weight: 1.1
$15.59
50-piece ceramic briquette set. Works in all grills designed for briquettes or lava rock. Fits briquette tray parts
94751,
92571 and other simular trays.
Part Number: 41650
Dimensions: 2” x 2”
Material: ceramic
Weight: 7.2
$47.58
Deluxe 17” stainless steel turner.
- Soft comfort rubber grip
- Stainless steel blade
Part Number: 43108
Material: stainless steel
Weight: 0.10
$9.48
economy basting brushes. Two brushes, 7.5” long.
Part Number: 43054
Weight: 0.1
$5.77
Stainless steel chicken roaster. Commonly called Beer Can roasters.
- The best way to roast poultry on the grill
- For use in barbecues and ovens
- Dishwasher safe
- Includes rack, rack support, and basting brush
Part Number: 41333
Material: stainless steel
Weight: 0.10
$19.84
Grill Mitt With Neoprene Palm. 16 in. silicone mitt diffuses heat away from the hand and washes easily. Black palm / red colored cuff. Cotton lined.
*One Size Fits Most
Part Number: 90963
Weight: 0.5
$17.59