MHP GJK3-NS

Genuine OEM MHP stainless steel H Burner for JNR and GJK Burner only for MHP model GJK3-NS.

Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0

Cast stainless steel oval burner. Fits W3G, T3G, WHRG, THRG, GHJK.

Part Number: GG-HCSSB
Weight: 0.8

Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, if needed, see catetory Repair Parts part number GG-IBC.)

Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05

Heavy-duty stainless steel cooking grid for GJK, WNK, and TJK series grills.

• High grade stainless
• 5/16” solid stainless rods
• Sold individually.

Part Number: GG-SS-GRID
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 6.0

SearMagic Cooking Grids for models THRG, TRG, TJK, WNK, WHRG, WRG, W3G, and T3G.

• High Performance, Rust-Free Anodized Aluminum Cooking Grids.
• Sold individually, number required varies

This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.

Part Number: GG-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 8 1/2”
Material: Anodized Aluminum
Weight: 2.2

SearMagic Cooking Grids for JNR - SOLD INDIVIDUALLY, two (2) required. High Performance, Rust-Free Anodized Aluminum Cooking Grids. This unique cooking grid heats up faster and cooks all foods at a uniform temperature. Use the wide-ribbed side for grilling steaks, chops, burgers and ribs, branding them with the sear lines. Use the flip side, with its smooth surface for grilling delicate foods such as fish, seafood and vegetables.
See part HH-GRIDS-SET for a set of two (2).

Part Number: HH-GRID-S
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 10”
Weight: 4.0

Premium grade stainless steel rock grate with 1/4” rods for WNK & TJK model grills for MHP model GJK3-NS.

Part Number: HH-GRATE-SS
Dimensions: 13 5/8” x 18”
Weight: 5.5

Ignitor shield.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-DEF
Weight: 0.3

Electronic Ignitor module.

• Two outlets
• Uses AAA battery, not included
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-EIB
Weight: 0.3

Hybrid Electronic Ignitor module.

• Four outlets
• Uses AAA battery, not included
• Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-EIB4
Weight: 0.3

12” igniter connecting wire for battery-operated electronic igniters. Female spade connector on one end connects to igniter, female spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-ERIW
Weight: 0.3

Igniter collector box for GJK.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: KK-IB
Weight: 0.15

Hybrid burner collector box.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-HIB
Weight: 0.2

Infrared/Hybrid Ignitor Probe

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IIP
Weight: 0.02

Infrared Hybrid Probe Shield

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: GG-IPS
Weight: 0.03

Brass 3/8” Sturgis quick connect coupler for use with hose part# ASCPL-2 (sold separately). Also, see part# ASCPL-1 for hose and coupler set.

Part Number: ASCPL-3
Weight: 0.4

Five piece 3/8” natural gas quick disconnect set includes:

• Part ASCPL-2 12ft vinyl 3/8” ID Sturgis hose (3/8” inside diameter outside diameter about 1/2”) with solid brass fittings
• Part ASCPL-3 Sturgis brand 3/8” quick connect brass coupler
• Hansen & Sturgis dust cover
• plastic dust plug
• Plastic 3/8 MPT Snap Tite
• Suitable up to approximately 60,000 BTU.

Part Number: ASCPL-1
Weight: 3.0

Infrared burner clip, one, and two cotter pins for MHP model GJK3-NS.

Part Number: GG-IBC
Material: stainless steel
Weight: 0.02

Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.

Part Number: 41338
Weight: 1.1

Natural lava rock processed and screened for uniformity. 7 lb. bag is enough for all full sized grills. Click the photo to find easy steps for installing lava rocks.

Part Number: 45887
Material: pummise
Weight: 7.0

Meat Claws.

Shredding pork, chicken, or beef has never been easier. Spare the fork these meat shedding claws can hold with the larger outside tines and shred fine strands of meat with the smaller inside tines. Crafted of stainless steel with an easy to use grip that can be held multiple ways.
Each claw is 8.25 in. in overall length.

Part Number: 44070
Dimensions: 8 1/4
Material: stainless steel
Weight: 0.5

Marinade Injector.

For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.

Part Number: 14950
Material: stailess steel
Weight: 0.5

Aluminum foil grilling trays. Package of three.

• Heavy duty aluminum foil
• Re-usable
• Great for grilling delicate foods like fish and veggies

Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4

EZ Check Gas level indicator. Accurate from -22° to 104°F. Magnetic back. Works on all sizes of tanks.

Part Number: 00030
Weight: 0.1