Home > MHP Grill Models > MHP GJK3-P
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your MHP grill.
Replacement grill parts to fit MHP model: GJK3-P
GJK3-P Burners
Genuine OEM MHP stainless steel H Burner for JNR and GJK Burner only for MHP model GJK3-P.
Part Number: HH-DSB
Dimensions: 8” x 15 5/8”
Material: stainless steel
Weight: 3.0
$52.30
Cast stainless steel oval burner. Fits W3G, T3G, WHRG, THRG, GHJK.
Part Number: GG-HCSSB
Weight: 0.8
$125.80
Rectangular Infra-Red Burner for WRG/TRG. The 14 inch dimension is from the tip of the support bracket to the end of the venturi. The burner itself is 12 1/4” by 6 1/2”. (For infrared burner clip, if needed, see catetory Repair Parts part number GG-IBC.)
Part Number: GG-IRB
Dimensions: 14” x 6 1/2”
Weight: 3.05
$137.23
GJK3-P Cooking Grids
Heavy-duty stainless steel
cooking grid for GJK, WNK, and TJK series grills.
- High grade stainless
- 5/16” solid stainless rods
- Sold individually.
Part Number: GG-SS-GRID
Dimension Front-to-Back: 15 3/4”
Dimension Side-to-Side: 12”
Material: stainless steel
Weight: 6.0
$102.11
GJK3-P Rock Grates
Premium grade stainless steel
rock grate with 1/4” rods for WNK & TJK model grills for MHP model GJK3-P.
Part Number: HH-GRATE-SS
Dimensions: 13 5/8” x 18”
Weight: 5.5
$73.70
GJK3-P Igniter Components
Ignitor shield.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-DEF
Weight: 0.3
$13.45
Electronic Ignitor module.
- Two outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB
Weight: 0.3
$31.52
Hybrid Electronic Ignitor module.
- Four outlets
- Uses AAA battery, not included
- Requires 3/4” mounting hole
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-EIB4
Weight: 0.3
$31.52
12” igniter connecting wire for battery-operated electronic igniters. Female
spade connector on one end connects to igniter, female
spade connector on the other end connects to electrode. Fits JNR, WNK, and TJK grill models equipped with electronic igniters. (Part numbers GG-ERIW and KK-IW are the same.)
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-ERIW
Weight: 0.3
$7.06
Igniter collector box for GJK.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: KK-IB
Weight: 0.15
$14.32
Hybrid burner collector box.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-HIB
Weight: 0.2
$13.80
Infrared/Hybrid Ignitor Probe
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IIP
Weight: 0.02
$12.58
Infrared Hybrid Probe Shield
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: GG-IPS
Weight: 0.03
Image not available
$6.08
GJK3-P Miscellaneous Repair Parts
Infrared burner clip, one, and two cotter pins for MHP model GJK3-P.
Part Number: GG-IBC
Material: stainless steel
Weight: 0.02
Image not available
$3.63
GJK3-P Accessories
shishkebob skewers
Part Number: 46074
Dimensions: 18” x 0 5/8”
Material: stainless steel
Weight: 0.4
$6.64
BBQ'er choice porcelain grill briquets. The finest available.
- Self-Cleaning Porcelain Briquettes.
- Made of fired porcelain for even heat transfer.
- Virtually indestructible.
- About 56 pieces covers approximately 310 square inches.
- Made in USA .
NOTE: MHP model TJK requires two (2) bags.
Part Number: BQ-3A
Weight: 4.2
$42.81
16” Stainless Steel Tong/Turner Combination. 16” multi-use tool with red soft grip rubber inserts. Can be used as a turner, tong or both. Manual lock saves on storage space.
Part Number: 40240
Material: chrome steel
Weight: 0.9
$16.59
Deluxe 13” basting mop with hardwood handle and cotton mop head.
Part Number: 42055
Dimensions: 13
Weight: 0.2
$8.76
Cast aluminum griddle
Part Number: 91652
Dimensions: 19 1/2” x 10 3/4”
Material: aluminum
Weight: 3.0
$27.83
deluxe 18” grill brush with hardwood handle with stainless steel bristles and scraper
MFGR BACK ORDER. This part is on back order with the manufacturer. Orders for this part will be filled when new stock arrives, which could be in two weeks, or two months.
Part Number: 70255
Dimensions: 18 5/8” x 3 1/2”
Weight: 0.7
$25.57