Mr. Steak Igniter Components. Replacement Igniter Components for Mr. Steak grills. FREE shipping.

Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Mr. Steak grill.

Mr. Steak Igniter Components

Ignition module switch for spark generators that accept wired remote (button) trigger switches for some Mr. Steak grills. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:

Push-button ignition module switch with two male spade connectors on back
Two 20” wires with female spade connectors
One plastic mounting nut

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1

$19.80

Universal 5 1/2” jumper wire with female spade ends to close off unused pair of outlets in battery-powered spark generator, or use as an adaptor wire for some Mr. Steak grills.
NOTICE: EACH END HAS A PLASTIC PROTECTOR CAP.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03197
Weight: 0.05

$4.65

Universal 2 5/8” adapter wire with female round and male spade connectors for some Mr. Steak grills. Primarily used when connecting spark generators (ignitors) to electrode wires with unlike connectors. Typically, push-button and rotory piezo spark generators have male round connectors, while battery operated electronic spark generators usually have male spade connectors.

Can change male round to male spade
Can change female spade to female round

ALL

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03198
Weight: 0.05

$5.35

Universal 2 3/4” adaptor wire with a round female end and a male spade end that has a protective cover for some Mr. Steak grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03199C
Weight: 0.05

$4.37

Universal battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has one (1) terminal (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03310
Weight: 0.3

$16.95

Universal volt battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has two (2) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03320
Weight: 0.3

$27.78

Universal battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03330
Weight: 0.5

$18.48

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Mr. Steak grills.

1.5 volt
Has three (3) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8” mounting hole

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3

$35.57

Universal three-outlet battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has three (3) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03333
Dimensions: 2 9/16” x 2”
Weight: 0.5

$33.89

Universal battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has (5) terminals (male spade connector)
Uses a single AAA battery (not included)
Requires 3/4” mounting hole

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03335
Dimensions: 2 5/8” x 2”
Weight: 0.3

$19.43

Universal four-outlet battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has four (4) terminals (male spade connector)
Uses a single AA battery (not included)
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03340
Weight: 0.5

$31.50

Universal battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has six (6) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03350
Weight: 0.7

$31.96

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger switch for some Mr. Steak grills.

Note: Some original ignitors (spark generators) that 03352 replaces had an integrated/built-in ground wire which is not present on this part (03352). If the ignitor you are replacing has an integrated/built-in ground wire, you will also need our ground wire part 03621. Inspect your system.

1.5 volt
Has five (5) spark outlets (male spade connector)
Has two (2) male spade connectors for the button/trigger switch part 03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/trigger switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03352
Dimensions: 3 3/8” x 2”
Weight: 0.7

$39.89

Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger for some Mr. Steak grills.

1.5 volt
Has six (6) spark outlets (male spade connector)
Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
Uses a single AA battery (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 2 5/8”

NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03356
Dimensions: 3 3/8” x 2”
Weight: 0.7

$39.89

Universal battery powered push button ignitor for some Mr. Steak grills.

1.5 volt
Has five (5) terminals (male spade connector)
Uses a single AA battery (not included))
03610 and 03620 wires are commonly used with this igniter (not included)
Requires 7/8” mounting hole
Overall dimensions: 2” x 3 3/8” x 3”
Some original igniters had an integrated ground wire. Use wire part# 03620 for this purpose.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03380
Dimensions: 3 5/16” x 2”
Weight: 0.7

$38.00

Ground wire required when replacing spark generator for a valve-triggered electrode with a remote switch-triggered spark generator for some Mr. Steak grills. 03621 plugs into one switch inlet; ring connects to generator neck; switch wire plugs into the other generator switch inlet

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03621
Dimensions: 1 1/8” x 1 1/8”
Weight: 0.1

$6.26

Universal adapter wire with male round and female spade connectors for some Mr. Steak grills.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 03751
Weight: 0.05

$3.84

electrode with female spade connection and 24 ins for some Mr. Steak grills. wire

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: 04440
Dimensions: 2 3/8” x 0 13/16”
Weight: 0.1

$9.63

Universal collector box with electrode and wire for some Mr. Steak grills. Fits most H burners, cast iron and stainless. Mounts to burner using venturi screws. Slotted construction allow universal adjustment of electrode position.

For more information about ignition systems and components, please see article Ignition 101 in our help center.

Part Number: IG-15B
Weight: 0.3