Home > Mr. Steak Grill Models > Mr. Steak MS-3B-PGMr. Steak 3-Burner Propane Grill
Use the dimensions of your old parts, preferably after removal, to compare to what we show below. Comparing dimensions is the best way to insure you get the right parts for your Mr. Steak grill.
Replacement grill parts for Mr. Steak model: MS-3B-PG
MS-3B-PG Burners
stainless steel burner for Mr. Steak model MS-3B-PG.
TEMPORARILY OUT OF STOCK, but more are already on the way. Orders for this part will be filled from new inventory expected to arrive mid May.
Part Number: 10021
Dimensions: 16” x 1”
Material: stainless steel
Weight: 0.6
$39.86
MS-3B-PG Burner Brackets and Carryovers
stainless steel cross-over for Mr. Steak model MS-3B-PG.
Part Number: 00031
Dimensions: 6 7/8” x 0 3/4”
Material: stainless steel
Weight: 0.1
$14.61
MS-3B-PG Cooking Grids
Cast iron
cooking grids (set of 2).
Porcelain treated, matte finish.
Part Number: 67222
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 19 1/8”
Material: cast iron
Weight: 7.10
$77.38
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually.
Part Number: 67241-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 8 3/4”
Material: porcelain cast iron
Weight: 5.55
$46.39
Premium universal cooking grid. Porcelain treated cast iron. Matte finish. Sold individually. See part 69762-UNI-X2 for a set of two (2) grids.
Part Number: 69762-UNI
Dimension Front-to-Back: 17 5/8”
Dimension Side-to-Side: 10 3/8”
Material: cast iron
Weight: 6.95
$50.85
MS-3B-PG Heat Plates
stainless steel
heat plate for Mr. Steak model MS-3B-PG.
Part Number: 90031
Dimension Front-to-Back: 15 3/8”
Dimension Side-to-Side: 5 3/4”
Material: stainless steel
Weight: 0.6
$23.33
MS-3B-PG Igniter Components
Ignition module switch for spark generators that accept wired remote (button) trigger switches. Fits our spark generator part numbers 03322, 03332, 03344, 03352, 03356, 03387 and 03388.
Includes:
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03152
Dimensions: 17 3/4” x 1”
Weight: 0.1
$19.80
Battery powered ignitor/spark generator for Surefire electronic ignition systems using remote button/trigger.
- 1.5 volt
- Has three (3) spark outlets (male spade connector)
- Has two (2) male spade connectors for trigger (button) part #03152 (sold separately)
- Uses a single AA battery (not included)
- Requires 7/8” mounting hole
NOTE: The battery cap is not a push button. The ignitor is fired by a remote button/switch.
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 03332
Dimensions: 2 5/8” x 2 5/8”
Weight: 0.3
$35.57
electrode with female spade connection and 24 ins. wire
For more information about ignition systems and components, please see article Ignition 101 in our help center.
Part Number: 04440
Dimensions: 2 3/8” x 0 13/16”
Weight: 0.1
$9.63
MS-3B-PG Warming Racks
Universal premium quality stainless steel warming rack. You simply can't buy a better quality warming rack than this, which weighs in at almost 5lbs of solid 304 grade stainless steel. This super heavy-duty warming rack was made to replace the porcelain coated steel racks found on BBQ grills made by The Great Outdoors Grill Company, but can be used in many other different grills.
- Far superior to the original porcelain coated steel rack
- Rests on your existing cooking grids.
- Solid 1/4” 304 stainless steel rods.
- Stands 3.75 inches tall.
- Made in USA .
WARNING: Before ordering this universal rack, please verify your grill has enough space to accommodate it. If you need to return, you will be responsible for return shipping, and the original out bound shipping fee will be deducted from the refund. What's required?
- Your grill needs to be at least 24” wide on the inside . The warming rack is 6.25” front to back and stands 3.75” tall.
- Notice the shape of the warming rack. Determine if the lid of your grill can easily close with the warming rack inside along with food placed on top of the rack.
Part Number: CLA-WS0040
Dimensions: 6 1/4” x 22 7/8”
Material: stainless steel
Weight: 4.8
$71.75
MS-3B-PG Accessories
Shish-ke-bab set. 6 chrome plated 14” skewers with convenient folding rack; folds out to 10” x 13 3/4”.
Part Number: 41338
Weight: 1.1
$22.60
20” Professional Extra Long Tong.
20” Stainless steel tong with red soft grip rubber inserts. Grip your food on the grill with ease. Manual lock saves on storage space.
Part Number: 40269
Material: stainless steel
Weight: 0.14
$14.99
Marinade Injector.For injecting flavor and marinades into meat. Disassembles for cleaning. Stainless steel injector tip. Graduated injection chamber.
Part Number: 14950
Material: stailess steel
Weight: 0.5
$14.41
Aluminum foil grilling trays. Package of three.
- Heavy duty aluminum foil
- Re-usable
- Great for grilling delicate foods like fish and veggies
Part Number: 50426
Dimensions: 9” x 13”
Weight: 0.4
$8.64
Deluxe venturi brush with 11” coil spring flexible shaft
Part Number: 77310
Weight: 0.3
$9.31
We ship Mr. Steak BBQ parts worldwide